Technical Data Sheet
Eastman Cristal™ Renew EN059-50
Applications
Color cosmetics packaging
Personal care & cosmetics packaging
Product Description
Eastman Cristal™ EN059-50 copolyester is an Eastman Specialty Plastics product for specific customer accounts only.
This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®.
The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman copolyesters, visit
www.greenguard.org
. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.Eastman Renew polymers have been certified by International Sustainability & Carbon Certification (ISCC), a global, independent agency for tracking sustainable content in a variety of industries. Renew polymers are produced with ISCC certified circular content by mass balance allocation.
Renew polymers enable a brand to reduce consumption of fossil feedstock-based plastics, achieve sustainability targets without compromise, and be a fast mover in a growing market for sustainable consumer products.
Typical Properties
Property
a
Test Method
b
Typical Value, Units
c
General Properties
Specific Gravity
D 792
1.33
Mold Shrinkage
D 955
0.002 mm/mm (0.002 in./in.)
Water Absorption, 24 h immersion
D 570
0.19 %
Mechanical Properties
Tensile Stress @ Yield
D 638
58 MPa (8400 psi)
Tensile Stress @ Break
D 638
24 MPa (3500 psi)
Elongation @ Yield
D 638
4 %
Elongation @ Break
D 638
90 %
Flexural Yield Strength
D 790
78 MPa (11300 psi)
Flexural Modulus
D 790
2400 MPa (3.5 x 10
5
psi)
Rockwell Hardness, R Scale
D 785
111
Izod Impact Strength, Notched
@ 23°C (73°F)
D 256
56 J/m (1.0 ft·lbf/in.)
@ -40°C (-40°F)
D 256
33 J/m (0.6 ft·lbf/in.)
Impact Strength, Unnotched
@ 23°C (73°F)
D 4812
NB
@ -40°C (-40°F)
D 4812
2446 J/m (46 ft·lbf/in.)
Impact Resistance (Puncture), Energy @ Max. Load
@ 23°C (73°F)
D 3763
32 J (24 ft·lbf)
@ -40°C (-40°F)
D 3763
38 J (28 ft·lbf)
Optical Properties
Haze
D 1003
<1 %
Total Transmittance
D 1003
82 %
Thermal Properties
Deflection Temperature
@ 0.455 MPa (66 psi)
D 648
69 °C (156 °F)
@ 1.82 MPa (264 psi)
D 648
63 °C (145 °F)
Vicat Softening Temperature
@ 1 kg load
D 1525
80 °C (176 °F)
Typical Processing Conditions
Drying Temperature
160 °C (320 °F)
Drying Time
4-6 hrs
Processing Melt Temperature
277-293 °C (530-560 °F)
Mold Temperature
16-32 °C (60-90 °F)
a
Unless noted otherwise, all tests are run at 23°C (73°F) and 50% relative humidity.
b
Unless noted otherwise, the test method is ASTM.
c
Units are in SI or US customary units.
Comments
Properties reported here are typical of average lots. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given.
Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.
10/20/2023 9:05:57 AM