Click for PDF
Technical Data Sheet
DuraStar™ Polymer DS2010 Natural


Applications
  • Consumer housewares-NFC
  • Eyewear
  • Large appliances non-food contact
  • Packaging components non food contact
  • Pens/stationary
  • Point-of-purchase
  • Small appliances non-food contact
  • Sporting equipment
Key Attributes
  • Excellent clarity
  • Excellent flow
  • Fast drying times
  • Good chemical resistance
  • Outstanding impact resistance
  • Quick cycle times

Product Description

Durastar™ DS2010 polymer contains a mold release. It has excellent appearance and is nearly water-clear. Its most outstanding features are toughness, chemical resistance, and excellent processing characteristics. DS2010 has very good toughness as shown by Izod impact resistance. Exposure to aromatic oils often causes crazing or actual fracture of many polymer resins, but DS2010 maintains its physical properties when exposed to these oils, and its appearance is virtually unchanged. Easy to process, it flows readily and fills intricate molds. Under existing United States Food and Drug Administration (FDA) regulations, Durastar™ DS2010 may be used in food contact articles which comply with the specifications and conditions of use in 21 CFR 177.1240. This product is certified to ANSI/NSF Standard 51.



Typical Properties

PropertyaTest MethodbTypical Value, Unitsc
Electrical Properties
Arc ResistanceD 495123 sec
Dielectric Constant 
     1 kHzD 1502.6
     1 MHzD 1502.5
     10 kHzD 1502.6
     100 kHzD 1502.5
Dissipation Factor 
     1 kHzD 1500.006
     1 MHzD 1500.015
     10 kHzD 1500.012
     100 kHzD 1500.015
Dielectric Strength, Short Time, 500 V/sec rate-of-riseD 14916.6 kV/mm (422 V/mil)
Surface ResistivityD 2571017 ohms/square
Volume ResistivityD 2571017 ohm·cm
Comparative Tracking IndexD 3638700 V
General Properties
Specific GravityD 7921.2
DensityISO 1183 1.19 g/cm3
Mold Shrinkage 
     Parallel to Flow, 3.2-mm (0.125-in.) thicknessD 9550.002-0.006 mm/mm (0.002-0.006 in./in.)
Mechanical Properties (ISO Method)
Tensile Stress @ YieldISO 52747 MPa
Tensile Stress @ BreakISO 52749 MPa
Elongation @ YieldISO 5274 %
Elongation @ BreakISO 527210 %
Flexural ModulusISO 1781750 MPa
Flexural StrengthISO 17864 MPa
Izod Impact Strength, Notched 
     @ 23°CISO 18029.6 kJ/m2
     @ -40°CISO 1806.3 kJ/m2
Impact Resistance (Puncture), Energy @ Max. Load 
     @ 23°CISO 6603-271 J
     @ -40°CISO 6603-255 J
Mechanical Properties
Tensile Stress @ YieldD 63846 MPa (6700 psi)
Tensile Stress @ BreakD 63853 MPa (7700 psi)
Elongation @ YieldD 6385 %
Elongation @ BreakD 638310 %
Flexural ModulusD 7901900 MPa (2.75 x 105 psi)
Flexural Yield StrengthD 79067 MPa (9700 psi)
Rockwell Hardness, R ScaleD 785105
Izod Impact Strength, Notched 
     @ 23°C (73°F)D 256370 J/m (7 ft·lbf/in.)
     @ -40°C (-40°F)D 25660 J/m (1.1 ft·lbf/in.)
Impact Strength, Unnotched 
     @ 23°C (73°F)D 4812NB
     @ -40°C (-40°F)D 4812NB
Impact Resistance (Puncture), Energy @ Max. Load 
     @ 23°C (73°F)D 376345 J (33 ft·lbf)
     @ -40°C (-40°F)D 376348 J (35 ft·lbf)
Optical Properties
HazeD 10030.3 %
Regular TransmittanceD 100389 %
Total TransmittanceD 100391 %
Thermal Properties (ISO Method)
Deflection Temperature 
     @ 0.455 MPa (66 psi)ISO 7573 °C
     @ 1.82 MPa (264 psi)ISO 7566 °C
Thermal Properties
Deflection Temperature 
     @ 0.455 MPa (66 psi)D 64873 °C (164 °F)
     @ 1.82 MPa (264 psi)D 64865 °C (149 °F)
UL Flammability Classificationd 
     3.0 mm specimenUL 9494V-2
Typical Processing Conditions
Drying Temperature 70 °C (160 °F)
Drying Time 3 hrs
Processing Melt Temperature 250-290 °C (480-550 °F)
Mold Temperature 15-30 °C (60-80 °F)

aUnless noted otherwise, all tests are run at 23°C (73°F) and 50% relative humidity.
bUnless noted otherwise, the test method is ASTM.
cUnits are in SI or US customary units.
dFor color AT



Comments
Properties reported here are typical of average lots. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given.
Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.

2/28/2018 11:35:39 AM