Technical Data Sheet
Eastman Cadence™ Renew GS5-100 copolyester

Applications Building materials Decorative laminates-metal Decorative laminates-wood Flooring Furniture Packaging component films Packaging components non food contact Protective film Transaction cards Walls Wood furniture

Key Attributes Excellent forming characteristics Low VOC emissions (indoor air quality) Not a material of concern PVC alternative Resistant to common household cleaning agents Resists curling, delaminating, and yellowing when exposed to heat Runs on existing calendering and thermoforming equipment Scratch resistant Wide calendering window

Product Description
Eastman Cadence™ Renew GS5-100 copolyester is the top-of-the-line copolyester resin for calendered film applications including decorative laminates, general purpose packaging, transaction and identification cards, and protective films.

Film producers looking to replace PVC and other materials of concern choose Cadence for its ease of processing, low-temperature toughness, and the ability to be downgauged – all of which help reduce cost. It has a wide calendering and thermoforming window, which enables Cadence to be used on most existing calendering lines and thermoforming equipment with little or no modification. Eastman Cadence resins require no pre-drying or additional stabilizers.

Brand owners prefer Cadence for its premium appearance, excellent toughness, and environmentally responsible track record. It is crystal clear, has excellent resistance to common household cleaners, and resists curling, delaminating, and yellowing when exposed to heat.

Eastman Renew polymers have been certified by International Sustainability & Carbon Certification (ISCC), a global, independent agency for tracking sustainable content in a variety of industries. Renew polymers are produced with ISCC PLUS certified recycled content by mass balance allocation.

Renew polymers enable a brand to reduce consumption of fossil feedstock-based plastics, achieve sustainability targets without compromise, and be a fast mover in a growing market for sustainable consumer products.

Typical Properties

Propertya	Test Methodb	Typical Value, Unitsc
Calender Film: Clear (Unpigmented)
Specific Gravity	D 792	1.27
Tensile Strength @ Break
M.D.	D 882	50 MPa (7200 psi)
T.D.	D 882	48 MPa (7000 psi)
Tensile Modulus, Tangent
M.D.	D 882	1870 MPa (2.7 x 105 psi)
T.D.	D 882	1825 MPa (2.6 x 105 psi)
Tensile Modulus, 1% Secant
M.D.	D 882	1800 MPa (2.6 x 105 psi)
T.D.	D 882	1760 MPa (2.6 x 105 psi)
Brittleness Temperature by Impacte	D 1790	-45 °C (-49 °F)
Durometer Hardness
Shore A Scale	D 2240	83
Shore D Scale	D 2240	73
Calender Film: Opaque White (Pigmented with TiO2)
Specific Gravityd	D 792	1.42
Tensile Strength @ Break
M.D.	D 882	47 MPa (6800 psi)
T.D.	D 882	45 MPa (6500 psi)
Tensile Modulus, Tangent
M.D.	D 882	2050 MPa (3.0 x 105 psi)
T.D.	D 882	2050 MPa (3.0 x 105 psi)
Tensile Modulus, 1% Secant
M.D.	D 882	2000 MPa (2.9 x 105 psi)
T.D.	D 882	1950 MPa (2.9 x 105 psi)
Brittleness Temperature by Impacte	D 1790	-40 °C (-40 °F)
Durometer Hardness
Shore A Scale	D 2240	86
Shore D Scale	D 2240	74

^aUnless noted otherwise, all tests are run at 23°C (73°F) and 50% relative humidity.
^bUnless noted otherwise, the test method is ASTM.
^cUnits are in SI or US customary units.
^dDependent upon colorant, fillers, etc.
^eData shown indicate test temperature at which all specimens break.



Comments
Properties reported here are typical of average lots. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given.

---

Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.

5/21/2026 10:17:51 AM