Technical Data Sheet
Eastman Cristal™ One E Lux Renew-100
Applications
Bottles-skin care pkg
Personal care & cosmetics packaging
Personal care bottles
Personal care packaging
Skin care packaging
Key Attributes
Effective barrier properties
Excellent drop impact strength
Excellent melt strength
Good chemical resistance
Good stiffness
Recyclable with the PET stream
Toughness
Transparency and clarity
Product Description
Eastman Cristal(TM) One E Lux Renew-100 is a copolyester designed for to be fully compatible with the PET recycling stream for extrusion-blown molded bottles for the skincare, personal care and color cosmetics markets. This resin is suitable for blow-molding both thin and thick-walled applications, while maintaining clarity, chemical compatibility, toughness and design freedom.
Eastman Cristal(TM) One E Lux Renew-100 meets the definition of resin identification code #1 (RIC1) as defined by the California Assembly Bill (#906) and by ASTM D7611, Association of Plastic Recyclers (APR) as well as European PET Bottle Platform (EPBP). Other end-product attributes, including but not limited to size, color, auxiliary components, and availability of collection, may also impact recyclability.
Eastman Renew polymers have been certified by International Sustainability & Carbon Certification (ISCC), a global, independent agency for tracking sustainable content in a variety of industries. Renew polymers are produced with ISCC certified circular content by mass balance allocation.
Renew polymers enable a brand to reduce consumption of fossil feedstock-based plastics, achieve sustainability targets without compromise, and be a fast mover in a growing market for sustainable consumer products.
Typical Properties
Property
a
Test Method
b
Typical Value, Units
c
General Properties (ASTM Method)
Density
D 792
1.31 g/cm
3
Mold Shrinkage
D 955
0.003-0.005 in./in.
Mechanical Properties (ASTM Method)
Tensile Modulus
D 638
2200 MPa
Tensile Strength
D 638
55 MPa
Elongation @ Break
D 638
>100 %
Flexural Modulus
D 790
2300 MPa
Flexural Yield Strength
D 790
77 MPa
Izod Impact Strength, Notched
@ 23°C (73°F)
D 4812
67 J/m
Impact Strength, Unnotched
@ 23°C (73°F)
D 4812
NB
Thermal Properties (ASTM Method)
Deflection Temperature
@ 1.82 MPa (264 psi)
D 648
64 °C
@ 0.455 MPa (66 psi)
D 648
69 °C
Typical Processing Conditions
Processing Melt Temperature
240-280 °C
Drying Temperature
135-140 °C (6-8 hrs)
a
Unless noted otherwise, all tests are run at 23°C (73°F) and 50% relative humidity.
b
Unless noted otherwise, the test method is ASTM.
c
Units are in SI or US customary units.
Comments
Properties reported here are typical of average lots. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given.
Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.
6/3/2024 9:09:03 AM