Technical Data Sheet
Eastman Cristal™ One Pro Renew-100
Applications
Color cosmetics packaging
Fragrance packaging
Jars-skin care pkg
Personal care & cosmetics packaging
Skin care packaging
Key Attributes
Ability to mold thick parts
Excellent processing capabilites
Good chemical resistance
Good gate aesthetics
Good toughness
Recyclable with the PET stream
Transparency
Product Description
Eastman Cristal™ One Pro Renew-100 is a copolyester designed to be fully compatible with the PET recycling stream. Thus, it enables brand owners to achieve recyclable cosmetics packaging that is tough, exhibits good chemical resistance. It is suitable for molding thick-walled transparent containers or parts (up to approximatively 12mm), while maintaining clarity and color.
Cristal™ One Pro Renew-100 meets the definition of resin identification code #1 (RIC1) as defined by the California Assembly Bill (#906) and by ASTM D7611, Association of Plastic Recyclers (APR) as well as European PET Bottle Platform (EPBP). Other end-product attributes, including but not limited to size, color, auxiliary components, and availability of collection, may also impact recyclability.
Eastman Renew polymers have been certified by International Sustainability & Carbon Certification (ISCC), a global, independent agency for tracking sustainable content in a variety of industries. Renew polymers are produced with ISCC-certified recycled content by mass balance allocation.
Renew polymers enable brand owners to reduce consumption of fossil feedstock-based plastics, achieve sustainability targets without compromise, and be a fast mover in a growing market for sustainable consumer products.
Typical Properties
Property
a
Test Method
b
Typical Value, Units
c
General Properties (ASTM Method)
Mold Shrinkage
D 955
0.003-0.005 in./in.
Specific Gravity
D 792
1.31 g/cc
Mechanical Properties (ASTM Method)
Impact Strength, Unnotched
@ 23°C (73°F)
D 4812
NB
Izod Impact Strength, Notched
@ 23°C (73°F)
D 4812
52 J/m
Flexural Yield Strength
D 790
78 MPa
Flexural Modulus
D 790
2400 MPa
Tensile Modulus
D 638
2300 MPa
Elongation @ Break
D 638
>150 %
Tensile Strength
D 638
54 MPa
Thermal Properties (ASTM Method)
Deflection Temperature
@ 1.82 MPa (264 psi)
D 648
62 °C
@ 0.455 MPa (66 psi)
D 648
70 °C
Typical Processing Conditions
Mold Temperature
16-38 °C (60-100 °F)
Processing Melt Temperature
250-280 °C (480-540 °F)
Drying Time
4-6 hrs
Drying Temperature
130-140 °C (265-285 °F)
a
Unless noted otherwise, all tests are run at 23°C (73°F) and 50% relative humidity.
b
Unless noted otherwise, the test method is ASTM.
c
Units are in SI or US customary units.
Comments
Properties reported here are typical of average lots. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given.
Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.
10/12/2022 8:26:38 PM