Technical Data Sheet
Eastman Cristal™ Renew copolyester AN001-80 Natural
Applications
Bottles-color cosmetics pkg
Closures-fragrance pkg
Color cosmetics packaging
Fragrance packaging
Personal care & cosmetics packaging
Key Attributes
Easy to extrude, cut, print, and seal
Effective barrier properties
Excellent chemical resistance
Excellent clarity
Excellent colorability
Good impact strength
Good stiffness
High gloss appearance
Toughness
Product Description
Eastman Cristal™ Renew copolyester AN001-80 Natural has excellent appearance and is nearly water-clear. Its most outstanding features are its chemical resistance and processing capabilities. Exposure to aromatic oils often causes crazing or actual fracture of many polymer resins, but Eastman Cristal™ Renew copolyester AN001-80 Natural maintains its physical properties when exposed to these oils, and its appearance is virtually unchanged. It is one of our premier materials for the cosmetics and personal care packaging market.
Eastman Renew polymers have been certified by International Sustainability & Carbon Certification (ISCC), a global, independent agency for tracking sustainable content in a variety of industries. Renew polymers are produced with ISCC certified circular content by mass balance allocation.
Renew polymers enable a brand to reduce consumption of fossil feedstock-based plastics, achieve sustainability targets without compromise, and be a fast mover in a growing market for sustainable consumer products.
This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED. The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ copolyesters, visit
www.greenguard.org
. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.
Typical Properties
Property
a
Test Method
b
Typical Value, Units
c
General
Specific Gravity
D 792
1.20
Mold Shrinkage
Parallel to Flow, 3.2-mm (0.125-in.) thickness
D 955
0.002-0.006 mm/mm (0.002-0.006 in./in.)
Mechanical Properties
Tensile Stress @ Yield
D 638
47 MPa (6900 psi)
Tensile Stress @ Break
D 638
51 MPa (7400 psi)
Elongation @ Yield
D 638
5 %
Elongation @ Break
D 638
320 %
Flexural Modulus
D 790
2000 MPa (2.9 x 10
5
psi)
Flexural Yield Strength
D 790
69 MPa (10000 psi)
Rockwell Hardness, R Scale
D 785
103
Izod Impact Strength, Notched
@ 23°C (73°F)
D 256
80 J/m (1.5 ft·lbf/in.)
@ -40°C (-40°F)
D 256
40 J/m (0.7 ft·lbf/in.)
Impact Strength, Unnotched
@ 23°C (73°F)
D 4812
NB
@ -40°C (-40°F)
D 4812
NB
Impact Resistance (Puncture), Energy @ Max. Load
@ 23°C (73°F)
D 3763
42 J (31 ft·lbf)
@ -40°C (-40°F)
D 3763
48 J (35 ft·lbf)
Optical Properties
Haze
D 1003
0.3 %
Regular Transmittance
D 1003
89 %
Total Transmittance
D 1003
91 %
Thermal Properties
Deflection Temperature
@ 0.455 MPa (66 psi)
D 648
73 °C (164 °F)
@ 1.82 MPa (264 psi)
D 648
65 °C (149 °F)
Typical Processing Conditions
Drying Temperature
70 °C (160 °F)
Drying Time
3 hrs
Processing Melt Temperature
230-280 °C (450-530 °F)
Mold Temperature
15-30 °C (60-80 °F)
a
Unless noted otherwise, all tests are run at 23°C (73°F) and 50% relative humidity.
b
Unless noted otherwise, the test method is ASTM.
c
Units are in SI or US customary units.
Comments
Properties reported here are typical of average lots. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given.
Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.
9/6/2023 3:01:00 PM