Technical Data Sheet
Eastman Cristal™ Renew copolyester CN015-25 Natural
Applications
Bottles-color cosmetics pkg
Closures-fragrance pkg
Color cosmetics packaging
Fragrance packaging
Personal care & cosmetics packaging
Key Attributes
Ability to mold thick parts
Ease of processing
Easy to extrude, cut, decorate, and seal
Excellent chemical resistance
Excellent clarity and color
Excellent colorability
Good impact strength
Good stiffness
High gloss appearance
Improved gate aesthetics
Readily fill intricate molds
Toughness
Product Description
Eastman Cristal™ Renew copolyester CN015-25 Natural is a high flow product that contains a mold release to provide ease of demolding. Designed specifically for the unique requirements of luxury cosmetic packaging, our premier PCTA copolyester delivers unsurpassed color and clarity and a capability to mold thick parts with improved gate aesthetics. Other outstanding features of Eastman Cristal™ Renew copolyester CN015-25 Natural include excellent chemical resistance, high gloss, and process enhancements such as faster drying times, faster cycle times, and lower scrap rates. Eastman Cristal™ Renew copolyester CN015-25 Natural is also ideally suited for two-shot molding techniques due to its lower processing temperatures, very slow crystallization rate, and flow characteristics.
Eastman Renew polymers have been certified by International Sustainability & Carbon Certification (ISCC), a global, independent agency for tracking sustainable content in a variety of industries. Renew polymers are produced with ISCC certified circular content by mass balance allocation.
Renew polymers enable a brand to reduce consumption of fossil feedstock-based plastics, achieve sustainability targets without compromise, and be a fast mover in a growing market for sustainable consumer products.
This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®. The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ copolyesters, visit
www.greenguard.org
. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.
Typical Properties
Property
a
Test Method
b
Typical Value, Units
c
General Properties
Specific Gravity
D 792
1.20 g/cm
3
Mold Shrinkage
D 955
0.003 mm/mm
Mechanical Properties
Tensile Stress @ Yield
D 638
50 MPa (7210 psi)
Tensile Stress @ Break
D 638
35 MPa (6240 psi)
Elongation @ Yield
D 638
4.5 %
Elongation @ Break
D 638
193 %
Flexural Modulus
D 790
1800 MPa (2.60 x 10
5
psi)
Flexural Strength
D 790
67 MPa (9717 psi)
Rockwell Hardness, R Scale
D 785
105
Izod Impact Strength, Notched
@ 23°C (73°F)
D 256
70 J/m (1.3 ft·lbf/in.)
@ -40°C
D 256
38 J/m (.70 ft·lbf/in.)
Impact Strength, Unnotched
@ 23°C (73°F)
D 4812
NB
@ -40°C
D 4812
NB
Impact Resistance (Puncture), Energy @ Max. Load
@ 23°C
D 3763
40 J (30 ft lbf/f)
Optical Properties
Total Transmittance
D 1003
90 %
Haze
D 1003
<.6 %
Thermal Properties
Deflection Temperature
@ 0.455 MPa (66 psi)
D 648
71 °C (160 °F)
@ 1.82 MPa (264 psi)
D 648
63 °C (145 °F)
Typical Processing Conditions
Drying Temperature
60 °C (140 °F)
Drying Time
2-4 hrs
Processing Melt Temperature
225-245 °C (440-470 °F)
Mold Temperature
16-50 °C (60-120 °F)
a
Unless noted otherwise, all tests are run at 23°C (73°F) and 50% relative humidity.
b
Unless noted otherwise, the test method is ASTM.
c
Units are in SI or US customary units.
Comments
Properties reported here are typical of average lots. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given.
Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.
9/11/2023 1:00:08 PM