Technical Data Sheet
Eastman Cristal™ Renew copolyester DN011-30
Applications
Bottles-color cosmetics pkg
Color cosmetics packaging
Personal care & cosmetics packaging
Product Description
Eastman Cristal™ Renew DN011-30 copolyester is a brilliantly clear polymer having excellent impact strength, chemical resistance, and low shrinkage rates. Eastman Cristal™ Renew DN011-30 copolyester contains a mold release.
Eastman Renew polymers have been certified by International Sustainability & Carbon Certification (ISCC), a global, independent agency for tracking sustainable content in a variety of industries. Renew polymers are produced with ISCC certified circular content by mass balance allocation.
Renew polymers enable a brand to reduce consumption of fossil feedstock-based plastics, achieve sustainability targets without compromise, and be a fast mover in a growing market for sustainable consumer products.
Typical Properties
Property
a
Test Method
b
Typical Value, Units
c
General
Specific Gravity
D 792
1.23
Mold Shrinkage
Parallel to Flow
D 955
0.002-0.005 mm/mm (0.002-0.005 in./in.)
Mechanical Properties
Tensile Stress @ Yield
D 638
44 MPa (6300 psi)
Tensile Stress @ Break
D 638
54 MPa (7800 psi)
Elongation @ Yield
D 638
4 %
Elongation @ Break
D 638
330 %
Tensile Modulus
D 638
1800 MPa (2.6 x 10
5
psi)
Flexural Modulus
D 790
1800 MPa (2.6 x 10
5
psi)
Flexural Strength
D 790
66 MPa (9600 psi)
Rockwell Hardness, R Scale
D 785
105
Izod Impact Strength, Notched
@ 23°C (73°F)
D 256
NB
@ -40°C (-40°F)
D 256
77 J/m (1.4 ft·lbf/in.)
Impact Strength, Unnotched
@ 23°C (73°F)
D 4812
NB
@ -40°C (-40°F)
D 4812
NB
Impact Resistance (Puncture), Energy @ Max. Load
@ 23°C (73°F)
D 3763
46 J (34 ft·lbf)
@ -40°C (-40°F)
D 3763
46 J (34 ft·lbf)
Optical Properties
Haze
D 1003
<1.0 %
Regular Transmittance
D 1003
89 %
Total Transmittance
D 1003
92 %
Thermal Properties
Deflection Temperature
@ 0.455 MPa (66 psi)
D 648
73 °C (163 °F)
@ 1.82 MPa (264 psi)
D 648
64 °C (147 °F)
Typical Processing Conditions
Drying Temperature
71 °C (160 °F)
Drying Time
6 hrs
Processing Melt Temperature
249-271 °C (480-520 °F)
Mold Temperature
16-38 °C (60-100 °F)
a
Unless noted otherwise, all tests are run at 23°C (73°F) and 50% relative humidity.
b
Unless noted otherwise, the test method is ASTM.
c
Units are in SI or US customary units.
Comments
Properties reported here are typical of average lots. Eastman makes no representation that the material in any particular shipment will conform to the values given.
Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.
10/20/2023 9:04:13 AM