Technical Data Sheet
Eastman™ Renew EN041-100
Applications
Flavored water packaging
Fruit juice drinks packaging
Personal care packaging
Soft drink packaging
Sport drinks packaging
Still water packaging
Key Attributes
Clear Appearance
Good for injection stretch blow molding (1 and 2 stage)
Not a material of concern
PVC alternative
Recyclable
Versatile processing capability
Product Description
Eastman™ Renew EN041-100 is a 0.82 ItV (dL/g) general-purpose PET, for single use food, beverage, cosmetic and personal care packaging. It is designed for injection stretch blow molding (ISBM), one and two stage processes. It is especially optimized for hotfill or heatset processing and is enhanced with a reheat additive.
Eastman Renew polymers have been certified by International Sustainability & Carbon Certification (ISCC), a global, independent agency for tracking sustainable content in a variety of industries. Renew polymers are produced with ISCC certified circular content by mass balance allocation.
Renew polymers enable a brand to reduce consumption of fossil feedstock-based plastics, achieve sustainability targets without compromise, and be a fast mover in a growing market for sustainable consumer products.
Typical Properties
Property
a
Test Method
b
Typical Value, Units
c
General Properties
Intrinsic Viscosity
EMN
d
0.82 ± 0.02 dL/g
Pellet Weight
EMN
e
65 pellet/gram
Acetaldehyde
EMN
f
< 2 ppm
Color, b*
EMN
g
< 1.0
Color, L* (CIELab, D65, 10°)
g
EMN
> 70
Melting Point
ASTM D 3418
247 ± 5 °C
Crystallinity
ASTM D 3418
>40 %
Density
h
ASTM D792
1.385 ± 0.015 g/cm
3
ASTM D792
1.333 ± 0.015 g/cm
3
Typical Processing Conditions
Drying Temperature
j
150-170 °C (300-340 °F)
Drying Time
j
4-6 hrs
Injection Molding Temperature
275-295 °C (530-565 °F)
Mold Temperature
10-30 °C (50-90 °F)
a
Unless noted otherwise, all tests are run at 23°C (73°F) and 50% relative humidity.
b
Unless noted otherwise, the test method is ASTM.
c
Units are in SI or US customary units.
d
EMN-A-AC-G-V-1, Similar to ASTM D4603
e
TEPO-A-AN-G-PTM-9
f
Pellet Residual, ASTM F2013
g
TM 4.5 Color spectrometer, EMN-A-AC-G-RS-1
h
Crystalline
i
Amorphous
j
Desiccant drying
Comments
Properties reported here are typical of average lots. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given.
Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.
4/17/2026 11:50:56 AM