Technical Data Sheet
Eastman Tritan™ Renew Copolyester LX100-30
Applications
Fragrance packaging
Jars-skin care pkg
Personal care & cosmetics packaging
Key Attributes
Ease of processing
Excellent clarity
Fast drying times
Good chemical resistance
Good heat resistance
Outstanding impact resistance
Quick cycle times
Product Description
Eastman Tritan™ Renew LX100-30 copolyester is an amorphous copolyester with excellent appearance and clarity. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. Tritan Renew LX100-30 was developed for the cosmetic, fragrance, and personal care markets. Tritan Renew LX100-30 can easily be converted into articles for application in consumer and personal care markets by injection molding, extrusion blow molding, and injection blow molding.
Eastman Renew polymers have been certified by International Sustainability & Carbon Certification (ISCC), a global, independent agency for tracking sustainable content in a variety of industries. Renew polymers are produced with ISCC certified circular content by mass balance allocation.
Renew polymers enable a brand to reduce consumption of fossil feedstock-based plastics, achieve sustainability targets without compromise, and be a fast mover in a growing market for sustainable consumer products.
Typical Properties
Property
a
Test Method
b
Typical Value, Units
c
General Properties
Specific Gravity
D 792
1.18
Mold Shrinkage
D 955
0.005-0.007 mm/mm (0.005-0.007 in./in.)
Mechanical Properties
Tensile Stress @ Yield
D 638
43 MPa (6200 psi)
Tensile Stress @ Break
D 638
53 MPa (7700 psi)
Elongation @ Yield
D 638
6 %
Elongation @ Break
D 638
210 %
Tensile Modulus
D 638
1550 MPa (2.25 x 10
5
psi)
Flexural Modulus
D 790
1550 MPa (2.25 x 10
5
psi)
Flexural Yield Strength
D 790
62 MPa (9000 psi)
Rockwell Hardness, R Scale
D 785
112
Izod Impact Strength, Notched
@ 23°C (73°F)
D 256
980 J/m (18.4 ft·lbf/in.)
@ -40°C (-40°F)
D 256
110 J/m (2.1 ft·lbf/in.)
Impact Strength, Unnotched
@ 23°C (73°F)
D 4812
NB
@ -40°C (-40°F)
D 4812
NB
Impact Resistance (Puncture), Energy @ Max. Load
@ 23°C (73°F)
D 3763
61 J (45 ft·lbf)
@ -40°C (-40°F)
D 3763
66 J (49 ft·lbf)
Optical Properties
Total Transmittance
D 1003
90 %
Haze
D 1003
<1 %
Thermal Properties
Deflection Temperature
@ 0.455 MPa (66 psi)
D 648
99 °C (210 °F)
@ 1.82 MPa (264 psi)
D 648
85 °C (185 °F)
Typical Processing Conditions
Drying Temperature
88 °C (190 °F)
Drying Time
4-6 hrs
Processing Melt Temperature
260-282 °C (500-540 °F)
Mold Temperature
38-66 °C (100-150 °F)
a
Unless noted otherwise, all tests are run at 23°C (73°F) and 50% relative humidity.
b
Unless noted otherwise, the test method is ASTM.
c
Units are in SI or US customary units.
Technical Disclaimer
Eastman makes no representation and disclaims any warranty that the material in any particular shipment will conform exactly to the values given. Values as well as the performance of the final molded article may be affected by various factors such as the part design, mold design or tooling, drying, processing conditions as well as coloring or pigmentation of the product. No warranty of merchantability or fitness for use is made, and nothing herein waives any of the Seller''s conditions of sale. You must make your own determination of the suitability of this product in your specific application due to the many factors (e.g. design, processing and conditions of use) that affect the performance of the final molded article. Suitability of use should be evaluated with appropriate testing and analysis. The processing melt temperature and mold temperature refer to the actual resin melt temperature and actual mold surface temperature respectively. Consider overall resin residence time, part shot size utilization and part geometry to set appropriate processing melt temperature and mold temperature in order to minimize IV loss and maximize molded part performance.
Comments
Properties reported here are based on limited testing. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given.
Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.
3/9/2022 4:12:57 PM