Technical Data Sheet
MARLOTHERM® SH Heat Transfer Fluid
Product Description
Marlotherm SH can be used over the whole working range without being kept under pressure. The boiling range of the product at atmospheric pressure is above the use limit. Marlotherm SH is most suitable for indirect heating of reactors, polymerisation vessels, and distillation columns of processing machines and driers as well as heat exchangers in process plants and systems for heat recovery.
Typical Properties
Property
Test Method
Typical Value, Units
General Properties
Normal Boiling Point
@ 1013 mbar
ASTM D 1078
385 - 395 °C
Pour Point
DIN ISO 3016
< -34 °C
Flash Point
EN 22719
approx. 200 °C
Autoignition Temperature
DIN 51794
approx. 500 °C
Physical and Thermal Properties
Appearance
Visual
liquid, clear
Chlorine
DIN 51408
< 10 ppm
Acid Number
DIN EN ISO 3682
≤ 0.02 mg KOH/g
Density
@ 20°C
DIN 51757
1.04 - 1.05
Viscosity
@ 20°C
DIN 51562
42 - 52 cSt
Comments
Properties reported here are typical of average lots. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given.
Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.
6/4/2019 10:19:29 AM