Technical Data Sheet
Eastman Solus™ 5675 performance additive
Applications
Electronics
Leather coatings
Plastic coatings
Product Description
Eastman Solus™ 5675 performance additive is designed to provide high-performance in consumer and industrial products. This cellulose ester enables low-application viscosities at relatively high solids levels due to tailored viscosity and reactivity properties. Solus™ 5675 is soluble in a wide range of solvents and compatible with many other resins, and when dissolved in appropriate solvents a clear, colorless solution is produced. This product, which is supplied as a dry free-flowing powder, will also permit the use of solvent blends currently exempt from certain air pollution regulations.
Eastman Solus™ 5675 is based on cellulose, one of the most abundant natural renewable resources.
For applications that require food contact compliance, please refer to Eastman Solus™ 5675, Food Contact and discuss requirements with your Eastman technical representative.
Typical Properties
Property
Typical Value, Units
General
Intrinsic Viscosity
a
0.757 dL/g
Hydroxyl Content
49 mg KOH/g
Moisture Content
<30,000 ppm
Color
Visual
Off-white
Bulk Density
Poured
515 kg/m
3
(32 lb/ft
3
)
Tapped
612 kg/m
3
(38 lb/ft
3
)
a
Samples were analyzed per ASTM D5225 at 30°C
Comments
Properties reported here are typical of average lots. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given.
Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.
1/15/2025 2:23:16 PM