Click for PDF View TDS
Technical Data Sheet
Eastman™ Chlorinated Polyolefin 164-1 (100% Solids)


Applications
  • Auto OEM
  • Auto plastics
  • Auto refinish
  • Automotive
  • General industrial coatings
  • Graphic arts
  • Protective coatings
  • Truck/bus/RV

Product Description
Eastman™ Chlorinated Polyolefin 164-1 (100% Solids) has an 18-23 wt. % chlorine content and a softening point of 80 - 105 degrees C. It is soluble in toluene and xylene. The limited solubility of CP 164-1 increases the resistance of the primer coat to re-dissolve during topcoat application. Eastman™ Chlorinated Polyolefin 164-1 (100%) was developed to improve not only initial adhesion, but also to improve adhesion after exposure to humidity and gasoline.

Typical Properties

PropertyTypical Value, Units
General
Specific Gravity 
     @ 25°C/25°C1.016
Flash Point 
     Tag Closed Cup>204 °C (>400 °F)
Color, Gardner12-16
Softening Point80-105 °C (176-221 °F)
Chlorine18-23 wt %



Comments
Properties reported here are typical of average lots. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given.


Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.