Technical Data Sheet
Tenite™ Propionate 376E4000012 Clear Trsp
Large appliances non-food contact
Tenite™ cellulosic plastics are noted for their excellent balance of properties - toughness, hardness, strength, surface gloss, clarity, and a warm feel. The mechanical properties of Tenite™ cellulosic plastics differ with plasticizer levels. Lower plasticizer content yields a harder surface, higher heat resistance, greater rigidity, higher tensile strength, and better dimensional stability. Higher plasticizer content increases impact strength. Tenite™ cellulosic plastics are available in natural, clear, selected ambers or smoke transparents and black translucent. Color concentrates are available in let-down ratios from 10:1 to 40:1. Tenite™ Cellulose Acetate Propionate 376-12 contains an ultra-violet inhibitor and has a plasticizer level of 12%.
Typical Value, Units
Tensile Stress @ Yield
31.7 MPa (4600 psi)
Tensile Stress @ Break
33.1 MPa (4800 psi)
Elongation @ Break
1448 MPa (2.10 x 10
Flexural Yield Strength
41.4 MPa (6000 psi)
Rockwell Hardness, R Scale
Izod Impact Strength, Notched
@ 23°C (73°F)
416 J/m (7.8 ft·lbf/in.)
@ -40°C (-40°F)
107 J/m (2.0 ft·lbf/in.)
Miscellaneous Propionate Properties
Refractive Index, n
@ 23°C (73°F)
1.26-1.67 kJ/kg·K (0.301-0.399 Btu/lb·°F)
0.17-0.33 W/m·K (1.2-2.3 Btu·in./h·ft
Coefficient of Linear Thermal Expansion
11-17 x 10
/°C (mm/mm·°C) (6-9 x 10
11.8-18.7 kV/mm (300-475 V/mil)
Water Absorption, 24 h immersion
Soluble Matter Loss
Weight Loss on Heating
[72 hours @ 80°C (176°F)]
@ 0.455 MPa (66 psi)
83 °C (181 °F)
@ 1.82 MPa (264 psi)
75 °C (167 °F)
Vicat Softening Temperature
96 °C (205 °F)
Unless noted otherwise, all tests are run at 23°C (73°F) and 50% relative humidity.
Unless noted otherwise, the test method is ASTM.
Units are in SI or US customary units.
Conditioned 4 hours @ 70°C (158°F).
1.52-mm (0.06-in.) thickness
Properties reported here are typical of average lots. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given.
Formula 376 - UVI; standard inventory. Available in 12% plasticizer only.
Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.
2/28/2018 11:35:39 AM