Click for PDF View TDS
Technical Data Sheet
Eastman™ Ethyl Acetate, Urethane Grade


Applications
  • Adhesives
  • Aerospace
  • Architectural coatings
  • Auto OEM
  • Auto plastics
  • Auto refinish
  • Commerical printing inks
  • Electronic chemicals
  • Flexographic printing inks
  • Food and beverage intermediates
  • Furniture
  • General industrial coatings
  • Graphic arts
  • HTF - pharmaceutical processing
  • Industrial maintenance
  • Lithographic printing inks
  • Marine
  • Oil or gas processing
  • Packaging component films
  • Packaging components non food contact
  • Packaging inks non food contact
  • Paints & coatings
  • Pharmaceutical chemicals
  • Photographic chemicals
  • Pipe non-food contact
  • Process solvents
  • Protective & performance film
  • Protective coatings
  • Wood coatings
Key Attributes
  • Excellent solvent activity
  • Fast evaporation rate
  • High electrical resistance
  • Inert - Nonfood use
  • Low MIR value
  • Low surface tension
  • Mild odor
  • Non-HAP
  • Non-SARA
  • Readily biodegradable
  • Urethane grade

Product Description

Eastman™ Ethyl Acetate, Urethane Grade is a low-boiling, fast-evaporating solvent with a mild, pleasant odor. It is widely used in formulating printing inks, adhesives, and lacquers. It is a non-HAP solvent with excellent activity for most coating resins. Ethyl acetate is miscible with most organic solvents and can be used in cleaner blends fo the removal of oils, grease, and soils.

The chemical substances for this product are listed as Inert Ingredients Permitted for Use in Nonfood Use Pesticide Products, and in Food Use Pesticide Products with limitations, under the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA). For details on specific permissions, click here.



Typical Properties

PropertyTypical Value, Units
General
Acidity 
     as Acetic Acid0.005 wt % max.
Assay99.8 wt % min.
Autoignition Temperature485 °C (905 °F)
Azeotropes 
     BP70.4 °C (158.7 °F)
     Wt % Water8.5 wt %
Blush Resistance 
     @ 80°F (26.7°C)39 % RH
Boiling Point 
     @ 760 mm Hg75.5-78.5 °C (168-173 °F)
Color 
     Pt-Co10 max.
Critical Pressure 38.3 ATM
Critical Temperature250.1 °C
Critical Volume286 ml/g·mol
Dilution Ratio 
     Toluene3.1
     VMP Naphtha1.1
Electrical Resistance20 Megohms
Empirical FormulaC4H8O2
Evaporation Rate 
     (ether = 1)3
     (n-butyl acetate = 1)4.1
Expansion Coefficient, per °C 
     @ 20°C0.00134
Flash Point 
     Tag Closed Cup-4 °C (24 °F)
Freezing Point-83 °C (-118 °F)
Hansen Solubility Parameters 
     Hydrogen Bonding3.5
     Nonpolar7.7
     Polar2.6
     Total8.8
Heat of Combustion-492.6 kcal/g·mol
Heat of Vaporization7703 cal/g·mol
Liquid Heat Capacity 
     @ 25°C40.82 cal/(g*mol)(°C)
Liquid Viscosity 
     @ 25°C0.5 cP (mPa·s)
Maximum Incremental Reactivity (MIR)0.64
Molecular Weight88.11
Nitrocellulose SolubilityActive
Refractive Index 
     @ 20°C1.3718
Solubility 
     in Water, @ 20°C7.4 wt %
     Water in, @ 20°C3.3 wt %
Specific Gravity 
     @ 20°C/20°C0.90
Surface Tension 
     @ 20°C23.9 dynes/cm
TLV PPM 1998400
Vapor Density 
     (air = 1)3
Vapor Pressure 
     @ 20°C86 mm Hg
     @ 55°C45.9 kPa
Wt/Vol 
     @ 20°C0.9 kg/L (7.51 lb/gal)



Comments
Properties reported here are typical of average lots. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given.


Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.


4/3/2018 2:15:09 PM