Click for PDF View TDS
Technical Data Sheet
Eastman Provista™ Copolymer UVO


Applications
  • Equipment & machinery
  • Point-of-purchase
  • Profiles
  • Wood furniture
Key Attributes
  • Ease of processing
  • Excellent chemical resistance
  • Sparkling clarity and high gloss
  • Toughness with flexibility

Product Description

Eastman Provista™ UVO is a copolymer with an indoor/outdoor UV package added to prevent yellowing caused by light. Provista™ copolymer is a resin specifically developed for extrusion into profiles where aesthetics like high clarity and gloss, coupled with design flexibility drive demand. Compared to commonly used materials, Eastman Provista™ copolymer can often run on most standard processing equipment at increased speeds. An extremely high melt strength makes the resin an excellent choice when extruding profiles into complicated shapes. This product is certified to ANSI/NSF Standard 51.

This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED
The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.



Typical Properties

PropertyaTest MethodbTypical Value, Unitsc
General Properties
DensityD 792 1.27 g/cm3
Mechanical Properties
Tensile Stress @ YieldD 63850 MPa (7300 psi)
Tensile Stress @ BreakD 63829 MPa (4200 psi)
Elongation @ YieldD 6384 %
Elongation @ BreakD 638109 %
Flexural ModulusD 7902200 MPa (3.2 x 105 psi)
Flexural StrengthD 79072 MPa (10400 psi)
Rockwell Hardness, R ScaleD 785106
Izod Impact Strength, Notchedd 
     @ 23°C (73°F)D 25694 (9C/1NB) J/m (1.8 (9C/1NB) ft·lbf/in.)
     @ -40°C (-40°F)D 25652C J/m (1.0C ft·lbf/in.)
Impact Strength, Unnotchede 
     @ 23°C (73°F)D 4812NB
     @ -40°C (-40°F)D 4812NB
Impact Resistance (Puncture), Energy @ Max. Loadf 
     @ 0°C (32°F)D 376337 J (27 ft·lbf)
     @ 23°C (73°F)D 376333 J (24 ft·lbf)
     @ -40°C (-40°F)D 376341 J (30 ft·lbf)
Optical Properties
HazeD 10030.6 %
Regular TransmittanceD 100388 %
Total TransmittanceD 100390 %
Gloss 
     @ 60°D 2457171
Color, b* 
     CIELAB, Illuminant D6500, 10° ObserverD 22440.61
Thermal Properties
Deflection Temperature 
     @ 0.455 MPa (66 psi)D 64867 °C (153 °F)
     @ 1.82 MPa (264 psi)D 64862 °C (144 °F)
Vicat Softening Temperature 
     @ 1 kg loadD 152579 °C (174 °F)

aUnless noted otherwise, all tests are run at 23°C (73°F) and 50% relative humidity.
bUnless noted otherwise, the test method is ASTM.
cUnits are in SI or US customary units.
dTesting conducted using 10 standard flex bars with 20 mil notch; C = complete break; NB = nonbreak.
eNonbreak as defined by ASTM D 4812.
fTesting conducted using 10 standard 4" x 4" x 0.125" thick injection molded plaques; 100% ductile break.



Comments
Properties reported here are based on limited testing. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given.


Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.


2/28/2018 11:35:39 AM