Click for PDF View TDS
Technical Data Sheet
Eastar™ Copolyester 5011


Applications
  • Building materials
  • Compounders
  • Electronic packaging
  • Jars-skin care pkg
  • Large appliances non-food contact
  • Non-kitchen appliances
  • Packaging component films
  • Packaging components non food contact
  • Personal care & cosmetics packaging
  • Personal care bottles
  • Personal care packaging
  • Sporting equipment
  • Strapping
  • Transaction cards
  • Window housings
  • Windows

Product Description
Eastar™ Copolyester 5011 is a glycol modified polyethylene terephthalate(PET). The modification is made by adding a second glycol, cyclohexanedimethanol (CHDM) during the polymerization stages. The second glycol is added in the proper proportion to produce an amorphous polymer.

This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®.
The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.



Typical Properties

PropertyaTest MethodbTypical Value, Unitsc
General Properties
Specific GravityD 7921.28
Mold Shrinkage 
     Parallel to Flow, 3.2-mm (0.125-in.) thicknessD 9550.002 mm/mm (0.002 in./in.)
     Parallel to Flow, 1.6-mm (0.0625-in.) thickness 0.005 mm/mm (0.005 in./in.)
Water Absorption, 24 h immersionD 570.13 %
Mechanical Properties
Tensile Strength @ BreakD 63825 MPa (3600 psi)
Elongation @ BreakD 63830 %
Flexural StrengthD 79075 MPa (10900 psi)
Flexural ModulusD 7902200 MPa (3.2 x 105 psi)
Rockwell Hardness, R ScaleD 785106
Izod Impact Strength, Notched 
     @ 23°C (73°F)D 25669 J/m (1.3 ft·lbf/in.)
     @ -40°C (-40°F)D 25628 J/m (.5 ft·lbf/in.)
Impact Strength, Unnotched 
     @ 23°C (73°F)D 4812NB J/m (NB ft·lbf/in.)
     @ -40°C (-40°F)D 48122600 J/m (50 ft·lbf/in.)
Optical Properties
HazeD 1003.3 %
Total TransmittanceD 100390 %
Thermal Properties
Deflection Temperature 
     @ 0.455 MPa (66 psi)D 64867 °C (152 °F)
     @ 1.82 MPa (264 psi)D 64862 °C (143 °F)
Typical Processing Conditions
Drying Temperature 71 °C (160 °F)
Drying Time 4-6 hrs
Processing Melt Temperature 249-271 °C (480-520 °F)
Mold Temperature 16-38 °C (60-100 °F)

aUnless noted otherwise, all tests are run at 23°C (73°F) and 50% relative humidity.
bUnless noted otherwise, the test method is ASTM.
cUnits are in SI or US customary units.



Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.


4/6/2018 1:51:15 PM