Click for PDF View TDS
Technical Data Sheet
Eastman Neostar™ Elastomer FN005


Applications
  • Automotive
  • Compounders
  • Equipment & machinery
  • Furniture
  • Multi-layer film non food contact
  • Packaging components non food contact
  • Point-of-purchase
  • Profiles
  • Strapping
Key Attributes
  • Environmentally preferred, non-halogenated material
  • Excellent chemical resistance
  • Exceptional heat resistance and high temperature dimensional stability
  • High flexibility without plasticizers
  • Solvent bondable

Product Description
Eastman Neostar™ Elastomer FN005 is a tough, clear, durable, general purpose grade copolyester ether. It was designed for use in the profile and automotive markets, but is also used in packaging and tubing applications where toughness and flex-crack resistance are required. Eastman Neostar™ Elastomer FN005 can be used in injection molding and cast film or tubing extrusion applications or in any application that demands strength, durability, and puncture resistance in harsh environments. This copolyester combines toughness, clarity, and flexibility without the addition of plasticizers. Eastman Neostar™ Elastomer FN005 is considered environmentally preferred because of its non-halogenated material composition. The target inherent viscosity of this product is 1.05.

This product has been CRADLE TO CRADLE CERTIFIEDTM Bronze, with Material Health Certificate, Platinum.
The CRADLE TO CRADLE CERTIFIED mark is a registered certification mark used under license through the Cradle to Cradle Products Innovation Institute, a nonprofit organization that administers the publicly available Cradle to Cradle CertifiedTM Product Standard which provides designers and manufacturers with criteria and requirements for continually improving product materials and manufacturing processes. The Cradle to Cradle CertifiedTM Product Standard guides designers and manufacturers through a continual improvement process that looks at a product through five quality categories—material health, material reutilization, renewable energy and carbon management, water stewardship, and social fairness. A product receives an achievement level in each category—Basic, Bronze, Silver, Gold, or Platinum—with the lowest achievement level representing the product’s overall mark.

The Material Health Certificate provides manufacturers with a trusted way to communicate their efforts to identify and replace chemicals of concern in their products. For more information about Cradle to Cradle certification and to obtain printable certificates for Eastman copolyesters, visit www.c2ccertified.org. Search for Eastman Chemical Company in Cradle to Cradle Certified Products Registry.



Typical Properties

PropertyaTest MethodbTypical Value, Unitsc
Film Properties
Thickness of Film Tested 0.13 mm (5 mils)
Refractive Index, nDD 5421.51
HazeD 10031 %
Gloss 
     @ 45°D 245780
Regular TransmittanceD 100390 %
Total TransmittanceD 100393 %
Tensile Strength @ Yield 
     M.D.D 88213.7 MPa (2000 psi)
     T.D.D 88213.5 MPa (2000 psi)
Tensile Strength @ Break 
     M.D.D 88223.7 MPa (3400 psi)
     T.D.D 88222.6 MPa (3300 psi)
Elongation @ Yield 
     M.D.D 88226 %
     T.D.D 88226 %
Elongation @ Break 
     M.D.D 882550 %
     T.D.D 882550 %
Tensile Modulus, Tangent 
     M.D.D 882185 MPa (26800 psi)
     T.D.D 882179 MPa (26000 psi)
Water Vapor Transmission RategF 372132 g/m2·24h (8.5 g/100in.2·24h)
Gas Permeability, O2 
     @ 30°C (86°F)D 1434841 cm3/m2*24h*atm (54 cm3/100in.2·24h·atm)
Coefficient of FrictionD 1894>1
Mechanical Properties
Specific GravityD 7921.13
Durometer Hardness 
     Shore A ScaleD 224095
     Shore D ScaleD 224055
Tensile Stress @ BreakdD 63820 MPa (2900 psi)
Tensile Stress @ YieldeD 63814 MPa (2030 psi)
Elongation @ YieldD 63830 %
Elongation @ BreakD 638300 %
Tensile ModulusD 638170 MPa (24650 psi)
Flexural ModulusD 790150 MPa (21750 psi)
Tear StrengthD 1004370 N (84 lbf)
Izod Impact Strength, Notched 
     @ -40°C (-40°F)D 25650 J/m (0.94 ft·lbf/in.)
Torsional Modulus Temperature 
     @ 240 MPa (35,000 psi)D 1043-28 °C (-18 °F)
     @ 930 MPa (135,000 psi)D 1043<-70 °C (<-94 °F)
Water Absorption, 24 h immersionD 5700.35 %
Thermal Properties
Inherent ViscosityEMN-A-AC-G-V-11.05
Flow Rate 
     (Condition 215°C/2.16 kg)D 123825 g/10 min
     (Condition 230°C/2.16 kg)D 123839 g/10 min
Crystalline Peak Melting Point (Tm)D 3418207 °C (405 °F)
Crystallization Temperature on Cooling (Tcc)DSC140 °C (284 °F)
Glass Transition Temperature (Tg)DSC-40 °C (-40 °F)
Specific Heatf 
     @ 100°C (212°F) - solidDSC1.8 kJ/kg·K (0.43 Btu/lb·°F)
     @ 150°C (302°F) - solidDSC2.0 kJ/kg·K (0.48 Btu/lb·°F)
     @ 175°C (347°F) - solidDSC2.3 kJ/kg·K (0.55 Btu/lb·°F)
     @ 200°C (392°F) - transitionDSC3.1 kJ/kg·K (0.74 Btu/lb·°F)
     @ 225°C (437°F) - meltDSC2.3 kJ/kg·K (0.55 Btu/lb·°F)
     @ 25°C (77°F) - solidDSC1.6 kJ/kg·K (0.38 Btu/lb·°F)
Heat of FusionE 79327 kJ/kg (11.6 Btu/lb)
Thermal ConductivityC 1770.19 W/m·K (1.3 Btu·in./h·ft2·°F)
Coefficient of Linear Thermal ExpansionD 69615 x 10-5 /°C (mm/mm·°C) (8 x 10-5 /°F (in./in.·°F))
Brittleness TemperatureD 746<-75 °C (<-103 °F)
Vicat Softening Temperature 
     @ 1 kg loadD 1525170 °C (338 °F)

aUnless noted otherwise, all tests are run at 23°C (73°F) and 50% relative humidity.
bUnless noted otherwise, the test method is ASTM.
cUnits are in SI or US customary units.
dD 412, Die C specimens, which are equivalent to ASTM D 638, Type IV specimens. Specimens were 2.0 mm (0.075 in.) thick and were tested using a crosshead speed of 500 mm (20 in.) per min.
eInjection molded ASTM D 638 Type I specimens, about 3 mm (1/8 in.) thick, were tested using a crosshead speed of 500 mm (20 in.) per min.
fFor 200°C (392°F) - transition, apparent specific heat, including the effects of the heat of fusion.
gTest conducted at 38°C (100°F) and 100% relative humidity.



Applications
NEOSTAR elastomers are tough, clear and durable. NEOSTAR elastomer FN005 can be injection molded or extruded. It has a property profile that is suitable for automotive applications such as trim and constant velocity or steering boots. It is suitable for coextrusion as a flexible element in profile extrusions.

Comments
Properties reported here are based on limited testing. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given.


Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.


2/21/2019 4:53:46 PM