Click for PDF
Technical Data Sheet

  • Adhesives/sealants-B&C
  • Bookbinding
  • Carpet construction
  • Case and carton closures
  • Casting wax
  • Commerical printing inks
  • Film modification
  • Hygiene adhesives
  • Labels non food contact
  • Polymer modification
  • Protective coatings
  • Specialty tape
  • Tires

Product Description
Regalite™ R1125 hydrocarbon resin is a low molecular weight fully hydrogenated water-white inert thermoplastic resin derived from petrochemical feedstocks. This resin is particularly useful as tackifier for hot melt systems based on EVA copolymers and SIS block copolymers.

Typical Properties

PropertyTest MethodTypical Value, Units
Ring and Ball Softening PointASTM E 28124 °C
Color, Hunterlab ba 
     5 cm path length 0.4
     @ 25°C 0.98 kg/dm3
Cloud Pointb 
     MMAP 87 °C
Molecular Weightc 
     Mn 760
     Mw 1140
     Mw/Mn 1.5
     Mz 1750
Melt Viscosity 
     @ 140°C >50000 cP
     @ 160°C 6800 cP
     @ 180°C 1200 cP
Glass Transition Temperature (Tg)d 70 °C

aUncentrifuged, 5 cm path length, 50% in toluene.
bMMAP cloud point temperature from 1:2 mixture of methylcyclohexane and aniline. Eastman method.
cMolecular weight measured via Gel Permeation Chromatography (GPC) using polystyrene standards, elution with THF.
dGlass transition temperature by differential scanning calorimetry, 20°C/minute.

Compatibility and Solubility
Compatible at all ratios, or in limited but practically useful proportions, with natural and synthetic rubbers, butyl rubber, EVA (ethylene-vinyl acetate) copolymers, EBA (Ethylene-butylacrylate), APAO (amorphous poly-alpha-olefins), SIS (styrene-isoprene-styrene) block copolymers, SBS (styrene-butadiene-styrene) block copolymers, SIBS (styrene-isoprene/butadiene-styrene) block copolymers, SEBS (styrene- ethylene/butylene- styrene) block copolymers, SEPS (styrene-ethylene/propylene-styrene) block copolymers, polyethylene, polypropylene polymers, PIB (polyisobutene) , OBC (olefinic block copolymer), mPE (metallocene catalyzed polyethylene), mPP (metallocene catalyzed polypropylene), and TPE (thermoplastic elastomers). Soluble at all useful proportions in aliphatic, aromatic, and chlorinated hydrocarbons. Insoluble in alcohols and water.

Regalite™ R1125 hydrocarbon resin is pastillated and packed in polyethylene bags of 20 kg net, and supplied on shrink-wrapped pallets of 50 bags (1000 kg) each, from Eastman’s facilities in the Netherlands and from warehouses located in Europe.

Due to the thermoplastic behavior, pastillated and flaked resins may fuse, block or lump. This can be accelerated under any of the following conditions: 1) above ambient temperature 2) prolonged storage 3) pressure, e.g., stacking pallets, or a combination of these conditions. This is particularly applicable for low softening point resin grades.

In order to maintain the flake or pastille shape, we therefore recommend storing the material in a temperature-controlled area, be careful with stacking material or applying pressure and preventing prolonged storage.

It should be noted that lumping does not have a negative impact on the product specifications. Due to the nature of the product, claims regarding lumping cannot be accepted.

Resins are prone to gradual oxidation, some more so than others. This could result in darkening and/or it could have an adverse effect on the solubility of the resin in organic solvents or on its compatibility with polymers. Accordingly, it is recommended that strict control of inventory be observed at all times, taking care that the oldest material is used first.

Regalite™ R1125 hydrocarbon resin will remain within product sales specification limits for a period of at least twelve months after shipment from Eastman production facilities in the Netherlands, provided storage conditions outlined in this data sheet are observed. However, as we can neither anticipate the conditions under which the resin is processed nor the end use applications for which it is used, the product should be reanalyzed for critical properties at the end of its shelf life to determine if it meets specification for use.

Properties reported here are typical of average lots. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given.

Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.

9/8/2022 8:26:26 AM