Technical Data Sheet
Tacolyn™ 5002 Resin Dispersion
Case & carton sealing closings
Labels non food contact
Paints & coatings
Tape non food contact
Waterborne packaging adhesives
Broad utility as a general purpose SBR tackifier
Enhances specific adhesion to polyolefin substrates and recycled corrugated board
Good moisture resistance
Good thermal and UV stability
Tacolyn™ 5002 resin dispersion is an aqueous, 55% solids, solvent-free, anionic hydrocarbon resin dispersion. It is recommended as a tackifier for natural rubber and styrene butadiene rubber latex polymers used in label, tape, construction, and contact adhesive applications. As a modifier for pressure sensitive label and tape adhesives, Tacolyn™ 5002 provides a good balance of peel and shear and enhances specific adhesion to polyolefin substrates and recycled corrugated board. Tacolyn™ 5002 is recommended for water-based contact adhesives where fast break properties are required as in foam to foam bonding applications.
Typical Value, Units
0.1000 % max
Ring and Ball Softening Point
ASTM E 28
Total solids content
pH Tolerance Range
Unless noted otherwise, all tests are run at 23°C (73°F) and 50% relative humidity.
Unless noted otherwise, the test method is ASTM.
Units are in SI or US customary units.
Average particle size
Wt% of particles > 45 microns
Dispersed phase (base resin + emulsifier)
Compatibility and Solubility
Compatible with acrylic, vinyl acetate-ethylene (VAE), polyvinyl acetate, styrene-butadiene rubber (SBR), polychloroprene (neoprene) and natural rubber latexes. When mixed with cationic substances, this dispersion may precipitate. When high alkaline or acidic additives are added to Tacolyn™ 5002, gross localized pH-variations should be avoided, as these can lead to destabilization and grit formation.
Available in lined fiber drums (445 lbs/202 kg net wt.), disposable totes or tank trucks. Keep container closed to prevent formation of dried film on container walls. If dry filming occurs, filter product before use.
The useful life of this product can be affected by storage and handling conditions. This dispersion will remain within product specification limits for at least 182 days from date of manufacture from an Eastman production facility provided that storage conditions are observed. The recommended storage temperature range is 50°-100°F. This resin dispersion may be irreparably damaged if frozen. Accordingly, all shipments in cold climate areas are made in insulated or heated carriers. It is recommended that strict control of inventory be observed at all times, taking care that the oldest material is used first.
Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.
2/28/2018 11:35:39 AM