Click for PDF View TDS
Technical Data Sheet

  • Adhesives/sealants-B&C
  • Bookbinding
  • Caps & lids non-food contact
  • Carpet construction
  • Case and carton closures
  • Commerical printing inks
  • Film modification
  • Hygiene adhesives
  • Labels non food contact
  • Packaging component films
  • Packaging components non food contact
  • Packaging tape
  • Paints & coatings
  • Polymer modification
  • Protective coatings
  • Road markings
  • Roofing ingredients
  • Solder flux
  • Solvent borne packaging adhesives
  • Specialty tape
  • Tape non food contact
  • Tires
  • Wax ingredients
  • Wire/cable
Key Attributes
  • Color retention
  • Excellent thermoplastic resin
  • High oxidation resistance
  • High softening point
  • Light color
  • Minimal odor

Product Description
Permalyn™ 6110-M is a high softening point, light color thermoplastic resin; it is a pentaerythritol ester of gum rosin, specially developed to be used in the Adhesives Industry. The special manufacturing process of this resin allows getting a product, which is highly resistant to oxidation, color retention and has minimum odor.

Typical Properties

PropertyTest MethodTypical Value, Units
Ring and Ball Softening PointASTM E 2895 °C
Color, Gardnera 3 - Neat Molten
Acid Number (mg KOH/g) 13
Description, Base Resin Gum Rosin

a50% resins solids in toluene or xylene

Compatibility and Solubility
Compatible with EVA copolymers, SIS block copolymers, Polychloroprene, pure phenolic resins, SBR, Acrylic Resins, natural gums, amorphous polypropylene, low molecular weight polyethylene, other rosin derivates, paraffins and chlorinated paraffins.

It is soluble in aromatic and aliphatic hydrocarbons, esters and ketones. Insoluble in methanol, ethanol and water.

Multilayer Kraft paper bags with 25 Kg net, in pieces.

This resin is provided in small pieces, since softening temperature is quite low, enables remassification, fusion or agglomeration under the following conditions: 1) High room temperature; 2) Storage near heat sources; 3) Extended storage; 4) Placing in very high piles or the combination o them. The large surface the pieces of resin present make them susceptible to gradual oxidation, which can be more advanced in some batches than others. This can cause darkening and/or affect the resin’s solubility in organic solvents and compatibility with polymers. Therefore, we strongly recommend keeping strict control of inventories at all times, and taking special care to ensure that the oldest material is used first. We suggest a shelf life of 6 months for this product.

Properties reported here are typical of average lots. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given.

Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.

11/16/2022 1:47:30 PM