Click for PDF View TDS
Technical Data Sheet

  • Adhesives/sealants-B&C
  • Bookbinding
  • Carpet construction
  • Case and carton closures
  • Casting wax
  • Commerical printing inks
  • Hygiene adhesives
  • Labels non food contact
  • Polymer modification
  • Protective coatings
  • Specialty tape
  • Tires

Product Description
Regalite™ S1100 hydrocarbon resin is a low molecular weight fully hydrogenated water-white thermoplastic resin derived from petrochemical feedstock. This resin is especially designed as tackifier in hot melt adhesives requiring good color retention upon ageing.

Typical Properties

PropertyTest MethodTypical Value, Units
Ring and Ball Softening PointASTM E 2897 °C
Color, Hunterlab ba 
     5 cm path length 0.7
     @ 25°C 0.99 kg/dm3
Cloud Pointb 
     MMAP 80 °C
Molecular Weightc 
     Mn 600
     Mw 820
     Mw/Mn 1.4
     Mz 1140
Melt Viscosity 
     @ 120°C 25000 cP
     @ 140°C 2500 cP
     @ 160°C 600 cP

aUncentrifuged, 5 cm path length, 50% in toluene.
bMMAP cloud point temperature from 1:2 mixture of methylcyclohexane and aniline. Eastman method.
cMolecular weight measured via Gel Permeation Chromatography (GPC) using polystyrene standards, elution with THF.

Compatibility and Solubility
Compatible at all ratios, or in limited but practically useful proportions, with natural and synthetic rubbers, butyl rubber, EVA (ethylene-vinyl acetate) copolymers, EBA (Ethylene-butylacrylate), APAO (amorphous poly-alpha-olefins), SIS (styrene-isoprene-styrene) block copolymers, SBS (styrene-butadiene-styrene) block copolymers, SIBS (styrene-isoprene/butadiene-styrene) block copolymers, SEBS (styrene- ethylene/butylene- styrene) block copolymers, SEPS (styrene-ethylene/propylene-styrene) block copolymers, polyethylene, polypropylene polymers, PIB (polyisobutene) , OBC (olefinic block copolymer), mPE (metallocene catalyzed polyethylene), mPP (metallocene catalyzed polypropylene), and TPE (thermoplastic elastomers). Soluble at all useful proportions in aliphatic, aromatic, and chlorinated hydrocarbons. Insoluble in alcohols and water.

Regalite™ S1100 hydrocarbon resin is pastillated and packed in polyethylene bags of 20 kg net, and supplied on shrink-wrapped pallets of 50 bags (1000 kg) each, from Eastman facilities in the Netherlands and from warehouses located in Europe.

Regalite S1100 is supplied in heated, insulated and inerted bulk containers, from Eastman facilities in the Netherlands.

Due to the thermoplastic behavior, pastillated and flaked resins may fuse, block or lump. This can be accelerated under any of the following conditions: 1) above ambient temperature 2) prolonged storage 3) pressure, e.g., stacking pallets, or a combination of these conditions. This is particularly applicable for low softening point resin grades.

In order to maintain the flake or pastille shape, we therefore recommend storing the material in a temperature-controlled area, be careful with stacking material or applying pressure and preventing prolonged storage.

It should be noted that lumping does not have a negative impact on the product specifications. Due to the nature of the product, claims regarding lumping cannot be accepted.

Resins are prone to gradual oxidation, some more so than others. This could result in darkening and/or it could have an adverse effect on the solubility of the resin in organic solvents or on its compatibility with polymers. Accordingly, it is recommended that strict control of inventory be observed at all times, taking care that the oldest material is used first.

Regalite™ S1100 hydrocarbon resin will remain within product sales specification limits for a period of at least twelve months after shipment from Eastman production facilities in the Netherlands, provided storage conditions outlined in this data sheet are observed. However, as we can neither anticipate the conditions under which the resin is processed nor the end use applications for which it is used, the product should be re-analyzed for critical properties at the end of its shelf life to determine if it meets specification for use.

Properties reported here are typical of average lots. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given.

Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.

9/8/2022 8:18:42 AM