Click for PDF View TDS
Technical Data Sheet
Piccotac™ 1100-E Hydrocarbon Resin


Applications
  • Adhesives/sealants-B&C
  • Carpet construction
  • Case and carton closures
  • Casting wax
  • Labels non food contact
  • Packaging tape
  • Polymer modification
  • Protective coatings
  • Road markings
  • Roofing ingredients
  • Specialty tape
  • Tape non food contact
  • Wire/cable
Key Attributes
  • Aliphatic C5 resin
  • Excellent adhesion in formulations with Natural Rubber
  • Excellent color and color stability
  • Excellent peel and tack properties
  • Good adhesion in formulations with styrene-isoprene-styrene (SIS) block copolymers

Product Description
Piccotac™ 1100-E hydrocarbon resin is a low molecular weight, aliphatic hydrocarbon resin, derived mainly from dienes and other reactive monomers. It is characterized by its light color, excellent balance of tack and of adhesive and cohesive properties, heat resistance, and wide compatibility. Piccotac 1100-E is designed as a tackifier for various adhesive and hot melt compositions, particularly pressure-sensitive systems that require high cohesive and quick-stick properties. Piccotac 1100-E is stabilized by addition of antioxidant.

Typical Properties

PropertyaTest MethodbTypical Value, Unitsc
General
Ring and Ball Softening PointASTM E 28100 °C
Color, GardnerdASTM D61663
Cloudpoint, DACPe 63 °C
Cloudpoint, MMAPf 96 °C
Molecular Weightg 
     Mn 1180
     Mw 2560
     Mw/Mn 2.2
     Mz 5900
Density 
     @ 25°C 0.975 kg/dm3

aUnless noted otherwise, all tests are run at 23°C (73°F) and 50% relative humidity.
bUnless noted otherwise, the test method is ASTM.
cUnits are in SI or US customary units.
d50% solids in toluene.
eCloud point temperature from 1:1 Vol:Vol xylene-diacetone alcohol, Eastman method.
fCloud point temperature from 2:1 Vol:Vol aniline-methylcyclohexane, Eastman method.
gMolecular weight measured via Gel Permeation Chromatography (GPC) using polystyrene standards, elution with THF.



Compatibility and Solubility
Compatible at all ratios or in limited but practically useful proportions, with natural and synthetic rubbers, low-vinyl acetate EVA (ethylene-vinyl acetate) copolymers, EnBA (ethylene n-butyl acetate) copolymers, APAO (amorphous poly-alpha-olefins), SIS (styrene-isoprene-styrene) block copolymers, SIBS (styrene-isoprene/butadiene-styrene) block copolymers, SEBS (styrene-ethylene/butylene-styrene) block copolymers, SEPS (styrene-ethylene/propylene-styrene) block copolymers, polyethylene polymers, polypropylene polymers, paraffin and microcrystalline waxes, PIB (polyisobutene), OBC (olefinic block copolymers), mPE (metallocene-catalyzed polyethylene), mPP (metallocene-catalyzed polypropylene), and TPE (thermoplastic elastomers).
Soluble at all useful proportions in aliphatic, aromatic, and chlorinated hydrocarbons and t-butyl acetate. Insoluble in alcohols and water.


Packaging
Piccotac™ 1100-E hydrocarbon resin is pastillated and packed in polyethylene bags of 20 kg net, and supplied on shrink wrapped pallets of 50 bags (1000 kg) each, from Eastman facilities in the Netherlands and from warehouses located in Europe.

Storage

Due to the thermoplastic behavior, pastillated and flaked resins may fuse, block or lump. This can be accelerated under any of the following conditions: 1) above ambient temperature 2) prolonged storage 3) pressure, e.g., stacking pallets, or a combination of these conditions. This is particularly applicable for low softening point resin grades. In order to maintain the flake or pastille shape, we therefore recommend storing the material in a temperature-controlled area; be careful with stacking material or applying pressure and preventing prolonged storage. It should be noted that lumping does not have a negative impact on the product specifications. Due to the nature of the product, claims regarding lumping cannot be accepted.

Resins are prone to gradual oxidation, some more so than others. This could result in darkening and/or it could have an adverse effect on the solubility of the resin in organic solvents or on its compatibility with polymers. Accordingly, it is recommended that strict control of inventory be observed at all times, taking care that the oldest material is used first.

Piccotac™ 1100-E hydrocarbon resin material will remain within product specification limits, for a period of at least twelve months after shipment from Eastman''s production facilities in the Netherlands, provided storage conditions outlined in this data sheet are observed. However, as we can neither anticipate the conditions under which the resin is processed nor the end use applications for which it is used, we recommend that the material be tested upon receipt.



Comments
Properties reported here are typical of average lots. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given.


Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.


6/24/2020 3:08:32 PM