Click for PDF View TDS
Technical Data Sheet
Picco™ A-140 Hydrocarbon Resin


Applications
  • Adhesives/sealants-B&C
  • Bookbinding
  • Carpet construction
  • Case and carton closures
  • Commerical printing inks
  • Lithographic printing inks
  • Packaging tape
  • Paints & coatings
  • Polymer modification
  • Protective coatings
  • Road asphalt
  • Road markings
  • Roofing
  • Specialty tape
  • Tape non food contact
  • Wire/cable
Key Attributes
  • Excellent pigment wetting
  • Excellent resistance to acids, alkalis and moisture
  • Excellent water repellant
  • Non-reactive
  • Thermoplastic

Product Description
Picco™ A140 Hydrocarbon Resin is a low molecular weight, amber colored thermoplastic resin produced from petroleum-derived monomers. Picco™ A140 is characterized by its excellent resistance to acids, alkalies and moisture. It shows good color stability and, when formulated with elastomers, a good balance of flex, tear, tack and adhesion properties.

This resin is particularly indicated as processing and reinforcing agent in rubber compounds and as binder in protective coatings.

Picco™ A140 Hydrocarbon Resin is polymerized under conditions that control its softening point within a narrow range.



Typical Properties

PropertyaTest MethodbTypical Value, Unitsc
General
Ring and Ball Softening PointASTM E 28140 °C
Color, GardnereASTM D 61666
Density 
     @ 25°C 1.07 kg/dm3
Molecular Weightf 
     Mn 940
     Mw 1800
     Mw/Mn 1.9
     Mz 3300
Viscosityd 
     @ 23°CHaake C&P15 Pa.s

aUnless noted otherwise, all tests are run at 23°C (73°F) and 50% relative humidity.
bUnless noted otherwise, the test method is ASTM.
cUnits are in SI or US customary units.
d50% in Halterman Test Oil 6/9
e50% in toluene.
fMolecular weight, z-average from gel permeation chromatography, elution with THF.



Compatibility and Solubility
Compatible at all ratios, or in limited but practically useful proportions, with SBR, rosin, modified rosins and rosin esters, alkyds and drying oils, polar elastomers, epoxy resins, and chlorinated rubber. Limited compatible with EVA (ethylene-vinyl acetate) copolymers.

Soluble at all useful proportions in aromatic, aliphatic, and chlorinated hydrocarbons; ink oils; benzyl alcohol; cyclohexanol; methyl ethyl ketone; esters; natural oils and fats. Insoluble in lower alcohols, acetone, and ethylene glycol.



Packaging
Picco™ A140 Hydrocarbon Resin is pastillated and packed in polyethylene bags of 25 kg net, and supplied on shrink-wrapped pallets of 40 bags (1000 kg) each, from Eastman facilities in The Netherlands and from warehouses located in Europe.

Storage

Due to the thermoplastic behavior, pastillated and flaked resins may fuse, block or lump. This can be accelerated under any of the following conditions: 1) above ambient temperature, 2) prolonged storage, 3) pressure, e.g., stacking pallets, or a combination of these conditions. This is particularly applicable for low softening point resin grades.

In order to maintain the flake or pastille shape, we therefore recommend storing the material in a temperature-controlled area, be careful with stacking material or applying pressure and preventing prolonged storage.

It should be noted that lumping does not have a negative impact on the product specifications. Due to the nature of the product, claims regarding lumping cannot be accepted.

Resins are prone to gradual oxidation, some more so than others. This could result in darkening and/or it could have an adverse effect on the solubility of the resin in organic solvents or on its compatibility with polymers. Accordingly, it is recommended that strict control of inventory be observed at all times, taking care that the oldest material is used first.

Picco™ A140 Hydrocarbon Resin material will remain within product specification limits, as mentioned under the heading "Product Specifications", for a period of at least twelve months after shipment from Eastman production facilities in The Netherlands, provided storage conditions outlined in this data sheet are observed. However, as we can neither anticipate the conditions under which the resin is processed nor the end use applications for which it is used, we recommend that the material be tested upon receipt.




Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.


2/28/2018 11:35:39 AM