Click for PDF View TDS
Technical Data Sheet
Eastar™ Copolyester MN004



Product Description
Eastar™ Copolyesters are brilliantly clear polymers that have excellent impact strength, chemical resistance, dimensional stability, and low shrinkage rates. Eastar™ MN004 contains a mold release.

This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®.
The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.



Typical Properties

PropertyaTest MethodbTypical Value, Unitsc
General
Specific GravityD 7921.23
Water Absorption, 24 h immersionD 5700.13 %
 ISO 620.13 %
Mold Shrinkage 
     Parallel to Flow, 3.2-mm (0.125-in.) thicknessD 9550.002-0.005 mm/mm (0.002-0.005 in./in.)
DensityISO 1183 1.23 g/cm3
Mechanical Properties
Tensile Stress @ YieldD 63845 MPa (6500 psi)
 ISO 52746 MPa
Tensile Stress @ BreakD 63852 MPa (7600 psi)
 ISO 52747 MPa
Elongation @ YieldD 6385 %
 ISO 5274.4 %
Elongation @ BreakD 638330 %
 ISO 527230 %
Flexural ModulusD 7901800 MPa (2.6 x 105 psi)
 ISO 1781800 MPa
Flexural Yield StrengthD 79066 MPa (9600 psi)
 ISO 17863 MPa
Rockwell Hardness, R ScaleD 785105
Izod Impact Strength, Notched 
     @ 23°CISO 180125 kJ/m2
     @ 23°C (73°F)D 256NB
     @ -40°CISO 1807.4 kJ/m2
     @ -40°C (-40°F)D 25664 J/m (1.2 ft·lbf/in.)
Impact Strength, Unnotched 
     @ 23°C (73°F)D 4812NB
     @ -40°C (-40°F)D 4812NB
Impact Resistance (Puncture), Energy @ Max. Load 
     @ 23°C (73°F)ISO 6603-214 J
     @ -40°C (-40°F)ISO 6603-216 J
Optical Properties
HazeD 1003<1.0 %
Regular TransmittanceD 100387 %
Total TransmittanceD 100389 %
Thermal Properties
Deflection Temperature 
     @ 0.45 MPaISO 7574 °C
     @ 0.455 MPa (66 psi)D 64874 °C (165 °F)
     @ 1.80 MPaISO 7565 °C
     @ 1.82 MPa (264 psi)D 64864 °C (147 °F)
Vicat Softening Temperature 
     @ 1 kg loadD 152588 °C (190 °F)
     @ 1 kg loadISO 30688 °C
     @ 5 kg loadISO 30679 °C
Thermal ConductivityC 1770.19 W/m·K (1.3 Btu·in./h·ft2·°F)
Specific Heat 
     @ 240°C (464°F)DSC2.05 kJ/kg·K (0.49 Btu/lb·°F)
     @ 60°C (140°F)DSC1.34 kJ/kg·K (0.32 Btu/lb·°F)
UL Flammability Classification 
     1.6 mm (0.0625 in.) specimenUL 9494HB
     3.2 mm (0.125 in.) specimenUL 9494HB
Typical Processing Conditions
Drying Temperature 75 °C (165 °F)
Drying Time 6 hrs
Processing Melt Temperature 250-270 °C (480-520 °F)
Mold Temperature 15-40 °C (60-100 °F)

aUnless noted otherwise, all tests are run at 23°C (73°F) and 50% relative humidity.
bUnless noted otherwise, the test method is ASTM.
cUnits are in SI or US customary units.


Comments
Properties reported here are typical of average lots. Eastman makes no representation that the material in any particular shipment will conform to the values given.

General
All ISO tests are run @ 4-mm thickness with the exception of Impact Resistance, which is run @ 2-mm thickness.

Eastman Medical Disclaimer
It is the responsibility of the medical device manufacturer ("Manufacturer") to determine the suitability of all component parts and raw materials, including any Eastman product, used in its final product in order to ensure safety and compliance with requirements of the United States Food and Drug Administration (FDA) or other international regulatory agencies.

Eastman Chemical Company products have not been designed for nor are they promoted for end uses that would be categorized by either the United States FDA or by the International Standards Organization (ISO) as implant devices. Eastman products are not intended for use in the following applications: (1) in any bodily implant applications for greater than 30 days, based on FDA-Modified ISO-10993, Part 1 “Biological Evaluation of Medical Devices” tests (including any cosmetic, reconstructive or reproductive implant applications); (2) in any cardiac prosthetic device application, regardless of the length of time involved, including, without limitation, pacemaker leads and devices, artificial hearts, heart valves, intra-aortic balloons and control systems, and ventricular bypass assisted devices, or (3) as any critical component in any medical device that supports or sustains human life.

Eastman Chemical Company products offered for the medical market have met selected FDA-Modified ISO-10993, Part 1 “Biological Evaluation of Medical Devices” tests with human tissue contact time of 30 days or less. The tests include: cytotoxicity, sensitization, irritation or intracutaneous reactivity, systemic toxicity (acute), subchronic toxicity (sub-acute), implantation, hemocompatibility. The Manufacturer is responsible for the biological evaluation of the finished medical device.

The suitability of an Eastman Product in a given end-use environment is dependent upon various conditions including, without limitation, chemical compatibility, temperature, part design, sterilization method, residual stresses, and external loads. It is the responsibility of the Manufacturer to evaluate its final product under actual end-use requirements and to adequately advise and warn purchasers and users thereof.


Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.


2/28/2018 11:35:39 AM