Technical Data Sheet
Applications
Adhesives/sealants-B&C
Carpet construction
Case and carton closures
Concrete
Flooring
Labels non food contact
Paints & coatings
Polymer modification
Protective coatings
Specialty tape
Tape non food contact
Waterborne packaging adhesives
Key Attributes
Broad utility as a general purpose isoprene and natural rubber tackifier
Exhibits good storage and mechanical stability
Highly resistant to acids and alkalies
Promotes low peel
Product Description
Tacolyn™ 5070 resin dispersion is an aqueous, 50% solids, solvent-free anionic aliphatic hydrocarbon dispersion prepared from a low molecular weight, aliphatic C5 hydrocarbon resin. It is recommended as a tackifier for isoprene rubber and natural rubber latex polymers used in tape applications. Tacolyn™ 5070 is ideal for low peel applications because it imparts peel strength in small increments relative to resination level. It exhibits good storage and mechanical stability and outstanding stability to acids. Tacolyn™ 5070 is also highly resistant to acids and alkalies.
Typical Properties
Property
Test Method
Typical Value, Units
General
Particle Size
a
250 nm
Coarse Particles
b
0.1000 % max
Ring and Ball Softening Point
c
ASTM E 28
70 °C
Shelf Life
243 days
Total solids content
50 %
pH
4.0
pH Tolerance Range
4-13
Viscosity
d
100 cP
Density
0.97 g/mL
a
Average particle size
b
Wt% of particles > 45 microns
c
Dispersed phase (base resin + emulsifier)
d
Brookfield, 25°C
Compatibility and Solubility
Compatible with natural rubber latex. When mixed with cationic substances, this dispersion may precipitate. When high alkaline or acidic additives are added to Tacolyn™ 5070, gross localized pH-variations should be avoided, as these can lead to destabilization and grit formation.
Packaging
Available in lined fiber drums (445 lbs/202 kg net wt.), disposable totes or tank trucks. Keep container closed to prevent formation of dried film on container walls. If dry filming occurs, filter product before use.
Storage
The useful life of this product can be affected by storage and handling conditions. This dispersion will remain within product specification limits for at least 243 days from date of manufacture from an Eastman production facility provided that storage conditions are observed. The recommended storage temperature range is 50°-100°F. This resin dispersion may be irreparably damaged if frozen. Accordingly, all shipments in cold climate areas are made in insulated or heated carriers. It is recommended that strict control of inventory be observed at all times, taking care that the oldest material is used first.
Comments
Properties reported here are typical of average lots. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given.
Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.
10/13/2022 10:12:51 AM