Click for PDF
Technical Data Sheet
Eastman EastaPure™ EB Solvent


Applications
  • Electronic chemicals
  • LCD displays
  • Process solvents
Key Attributes
  • Excellent resin solubility
  • High Purity/Low Trace Metals
  • High assay
  • Inert - Food use with limitations
  • Inert - Nonfood use
  • Viscosity control

Product Description

Eastman EastaPure™ EB solvent is a high flash point, water miscible, colorless solvent providing slow evaporation rate and good viscosity control for a broad range of polymers, resins and coatings. It is primarily used in the production of electronic components in the etching and photoresist processes.

Miscible with most organic solvents and water, EastaPure™ EB solvent enables formulators to develop customized blends that meet the most demanding requirements for electronic chemicals in wet processing and photoresist applications.

The chemical substances for this product are listed as Inert Ingredients Permitted for Use in Nonfood Use Pesticide Products, and in Food Use Pesticide Products with limitations, under the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA). For details on specific permissions, click here.



Typical Properties

PropertyTest MethodTypical Value, Units
General
Acidity 
     as Acetic Acid 0.01 wt % max.
Assay 99.0 wt % min.
Autoignition TemperatureD 2155238 °C (460 °F)
Azeotropes 
     BP 98.8 °C (209.8 °F)
     Wt % Water 79.2 wt %
Blush Resistance 
     @ 80°F (26.7°C) 96 % RH
Boiling Point @ 760 mm Hg 
     Dry Point 172 °C (343 °F)
     Initial 169 °C (336 °F)
Color 
     Pt-Co 10 max.
Critical Pressure  32 ATM
Critical Temperature 326.8 °C
Critical Volume 400 ml/g·mol
Dilution Ratio 
     Toluene 3.4
     VMP Naphtha 2.1
Electrical Resistance <0.2 Megohms
Empirical Formula C6H14O2
Evaporation Rate 
     (ether = 1) 136
     (n-butyl acetate = 1) 0.09
Expansion Coefficient, per °C 
     @ 20°C 0.00092
Explosive Limits in Air 
     Lower @ 93°C 1.1 Vol %
     Upper @ 135°C 12.7 Vol %
Fire Point 70 °C (158 °F)
Flash Point 
     Tag Closed Cup 62 °C (143 °F)
     Tag Open Cup 70 °C (158 °F)
Freezing Point -75 °C (-103 °F)
Hansen Solubility Parameters 
     Hydrogen Bonding 6
     Nonpolar 7.8
     Polar 2.5
     Total 10.2
Heat of Combustion -848.5 kcal/g·mol
Heat of Vaporization 11060 cal/g·mol
Liquid Heat Capacity 
     @ 25°C 65.49 cal/(g*mol)(°C)
Liquid Viscosity 
     @ 20°C 3.3 cP (mPa·s)
Maximum Incremental Reactivity (MIR) 2.9
Molecular Weight 118.17
Nitrocellulose Solubility Active
Refractive Index 
     @ 20°C 1.4193
Solubility 
     in Water, @ 20°C Complete
     Water in, @ 20°C Complete
Specific Gravity 
     @ 20°C/20°C 0.902
Surface Tension 
     @ 20°C 26.6 dynes/cm
     TLV PPM 2014 20 dynes/cm
Upper Limits for Trace Metals 
     Aluminium (Al) 100 ppb
     Barium (Ba) 100 ppb
     Cadmium (Cd) 100 ppb
     Calcium (Ca) 100 ppb
     Chromium (Cr) 100 ppb
     Cobalt (Co) 100 ppb
     Copper (Cu) 100 ppb
     Gallium (Ga) 100 ppb
     Germanium (Ge) 100 ppb
     Iron (Fe) 100 ppb
     Lead (Pb) 100 ppb
     Lithium (Li) 100 ppb
     Magnesium (Mg) 100 ppb
     Manganese (Mn) 100 ppb
     Nickel (Ni) 100 ppb
     Potassium (K) 100 ppb
     Silver (Ag) 100 ppb
     Sodium (Na) 100 ppb
     Titanium (Ti) 100 ppb
     Zinc (Zn) 100 ppb
Vapor Density 
     (air = 1) 4.1
Vapor Pressure 
     @ 20°C 0.6 mm Hg
     @ 55°C 0.97 kPa
Wt/Vol 
     @ 20°C 0.9 kg/L (7.51 lb/gal)



Comments
Properties reported here are typical of average lots. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given.


Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.


4/3/2018 10:48:58 AM