Click for PDF
Technical Data Sheet
Eastman Optifilm™ Additive OT1200

  • Architectural coatings
  • Commerical printing inks
  • Exterior architectural coatings
  • Graphic arts
  • Interior flat architectural coatings
  • Interior non-flat architectural coatings
  • Paints & coatings
Key Attributes
  • Enables low VOC and low emission paints
  • Improves application properties through extended workability
  • Increase open time and wet edge over a range of conditions
  • Low VOC*
  • Maintains other paint performance
  • Non-HAP
  • Non-SARA
  • REACH compliant

Product Description
Eastman Optifilm™ additive OT1200 uniquely improves the application properties of your paint through improved workability and longer open time over a range of application conditions. OT1200 is a low VOC additive and does not negatively affect other key paint properties such as water resistance, wet adhesion, block resistance and stability. Because the impact of OT1200 is in the early stages of film formation, it will not affect dry time or recoat time of the paint. OT1200 can be substituted for volatile glycols, giving a substantial reduction in the VOC content while improving the application feel and workability of the paint. The additive helps meet a global need of architectural paint formulators to develop compliant solutions without compromising performance.

* In regions defining VOC by a boiling point of 250°C, Eastman Optifilm™ additive OT1200 contains <1% VOC. In the US, the VOC content of OT1200 is 7%, as determined by an outside lab using the ASTM D2369 volatility less water (ASTM D4017) and ammonia.

Typical Properties

PropertyTypical Value, Units
Active Content69 %
Density9.0 lb/gal (1.08 g/cm3)
Viscosity8500 cps
Water28 %

a5 g of Optifilm OT1200 in 100 g of water

Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.

2/28/2018 11:35:39 AM