Click for PDF View TDS
Technical Data Sheet
Eastman Tritan™ Copolyester MP200


Applications
  • Flexible medical device packaging
  • Pharmaceutical packaging
  • Rigid medical packaging
Key Attributes
  • Best-in-class toughness
  • Complaint with ISO1167
  • Compliant with select ISO10993, USP 35 <661> Tests
  • Does not contain Bisphenol-A (BPA)
  • Does not contain plasticizers
  • Enduring sustainability
  • Excellent heat resistance
  • Outstanding chemical resistance
  • Reliable, predictable processing for extrusion, thermoforming, heat and radio frequency sealing
  • Suitable for most forms of sterilization
  • Superb clarity and high gloss

Product Description
Eastman Tritan(TM) MP200 is an amorphous copolyester that combines excellent clarity and toughness with outstanding heat and chemical resistance. Film and sheet manufactured from this new-generation copolyester can be thermoformed with a wide processing window that allows for product designs that reflect intricate detail. Eastman Tritan MP200 copolyester is suitable for use with most forms of sterilization including radiation and ethylene oxide. It is NOT suitable for autoclave/steam sterilization. Eastman Tritan MP200 copolyester has been formulated for use in medical film, sheet, and packaging applications.

Typical Properties

PropertyaTest MethodbTypical Value, Unitsc
General Properties
Thickness of Film TestedASTM D 3740.254 mm (0.010 in.)
DensityASTM D 15051.19 g/cm3
Water Vapor Transmission Rated 
     @ 23°C (73°F)ASTM F 12494 g/m2·24h (0.3 g/100in.2·24h)
     @ 38°C (100°F) 10 g/m2·24h (1 g/100in.2·24h)
Gas Permeability, CO2ASTM D 1434211 cm3·mm/m2·24h·atm (534 cm3·mil/100in.2·24h·atm)
Gas Permeability, O2ASTM D 398544 cm3·mm/m2·24h·atm (111 cm3·mil/100in.2·24h·atm)
Elmendorf Tear Resistance 
     M.D.ASTM D 19223.7 N (384 gf)
     T.D. 4.2 N (433 gf)
PPT Tear Resistance 
     M.D.ASTM D 258240 N (9 lbf)
     T.D. 40 N (9 lbf)
Tear Propagation Resistance, Split Tear Methode 
     M.D.ASTM D 19383 N (1 lbf)
     M.D. 10 N/mm (55 lbf/in.)
     T.D. 2 N (1 lbf)
     T.D. 9 N/mm (51 lbf/in.)
Tear Resistance, Trouser @ 200 mm/min 
     M.D.ISO 6383-110 N/mm (56 lbf/in.)
     T.D. 9 N/mm (52 lbf/in.)
Tensile Strength @ Yield 
     M.D.ASTM D 88243 MPa (6300 psi)
     T.D. 41 MPa (6000 psi)
Tensile Strength @ Break 
     M.D.ASTM D 88257 MPa (8300 psi)
     T.D. 42 MPa (5900 psi)
Elongation @ Yield 
     M.D.ASTM D 8828 %
     T.D. 8 %
Elongation @ Break 
     M.D.ASTM D 882114 %
     T.D. 115 %
Tensile Modulus 
     M.D.ASTM D 8821500 MPa (2.2 x 105 psi)
     T.D. 1400 MPa (2.1 x 105 psi)
Dart Impactf 
     @ -18°C (0°F) 825 g (1.82 lb)
     @ 23°C (73°F)ASTM 1709A825 g (1.82 lb)
     @ -30°C (-22°F) 852 g (1.88 lb)
Puncture Resistance (Dynatup); Total EnergyASTM D 37634.5 J (3.3 ft-lb)
Water Absorption, 24 hoursASTM D 5700.5 %
Surface Energy 
     Dispersive 39 dynes/cm
     PolarASTM D 59468 dynes/cm
     Total 47 dynes/cm
Taber Abrasion (average at 25 cycles)ASTM 104420 % haze
Optical Properties
Refractive IndexASTM D 5421.54
Yellowness IndexASTM D 19250.5
UV % Transmission at 380 nmUV/Vis Spectro89 %
HazeASTM D 10030.8 %
Gloss @ 60°ASTM D 2457158
Light Transmission (Total Transmittance)ASTM D 100393 %
Thermal Properties
Glass Transition Temperature (Tg)DSC119 °C (247 °F)
Specific Heat 
     @ 100°C (212°F) 1.9 J/g-°C (0.46 Btu/lb·°F)
     @ 150°C (302°F) 2.3 J/g-°C (0.54 Btu/lb·°F)
     @ 200°C (392°F) 2.4 J/g-°C (0.58 Btu/lb·°F)
     @ 250°C (482°F) 2.6 J/g-°C (0.62 Btu/lb·°F)
     @ 60°C (140°F)DSC1.7 J/g-°C (0.42 Btu/lb·°F)
Coefficient of Linear Thermal ExpansionASTM D 6968 (x10-5/°C) (5 (x10-5/°F))

aUnless noted otherwise, all tests are run at 23°C (73°F) and 50% relative humidity.
bUnless noted otherwise, the test method is ASTM.
cUnits are in SI or US customary units.
d(a) Test conducted at 23°C (73.4°F) and 100% relative humidity. (b) Test conducted at 38°C (100.4°F) and 100% relative humidity.
e@ 254 mm/min (10 in./min)
f12.7 mm (1/2 in.) dia. head, 127 mm (5 in.) dia. clamp, 660 mm (26 in.) drop



Eastman Medical Disclaimer
Eastman makes no representation and disclaims any warranty that the material in any particular shipment will conform exactly to the values given. Values as well as the performance of the final molded article may be affected by various factors such as the part design, mold design or tooling, drying, processing conditions as well as coloring or pigmentation of the product. No warranty of merchantability or fitness for use is made, and nothing herein waives any of the Seller''s conditions of sale. You must make your own determination of the suitability of this product in your specific application due to the many factors (e.g. design, processing and conditions of use) that affect the performance of the final molded article. Suitability of use should be evaluated with appropriate testing and analysis. The processing melt temperature and mold temperature refer to the actual resin melt temperature and actual mold surface temperature respectively. Consider overall resin residence time, part shot size utilization and part geometry to set appropriate processing melt temperature and mold temperature in order to minimize IV loss and maximize molded part performance.

Comments
Properties reported here are typical of average lots. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given.


Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.


9/26/2019 9:53:08 AM