Technical Data Sheet
Eastman Amphora™ 3D polymer HT5300
Applications
Compounders
Consumer electronics
Key Attributes
Clarity and gloss
Dimensional stability
Enhanced aesthetics
Excellent temperature resistance
Excellent toughness
FDA compliance
Low odor
Property retention in 3D applications
Styrene-free
Workability
Product Description
Eastman Amphora™ HT5300 3D polymer is a low-odor, styrene-free material uniquely suited for advanced 3D printing users, particularly those who need their creations to exhibit superior durability, dimensional stability, toughness, and high-temperature resistance. The model of functional aesthetics, Amphora HT5300 can be made into high-quality filament that exhibits advanced overhang ability, excellent toughness and temperature resistance, good looks, and superior melt strength—empowering professional users to create durable, more useful items. Demonstrating superior dimensional stability, BPA-free HT5300 allows for 3D printing to exacting dimensions, which is especially important for products with tight tolerances and multi-component parts. Moreover, with its outstanding toughness and chemical resistance, Amphora HT5300 is ideal for prototyping and testing products, especially for applications that require temperature resistance up to 100°C.
Typical Properties
Property
a
Test Method
b
Typical Value, Units
c
General Properties
Specific Gravity
D 792
1.18
Mechanical Properties
Tensile Stress @ Yield
D 638
43 MPa (6200 psi)
Tensile Stress @ Break
D 638
52 MPa (7500 psi)
Elongation @ Yield
D 638
7 %
Elongation @ Break
D 638
210 %
Flexural Modulus
D 790
1575 MPa (2.28 x 10
5
psi)
Flexural Strength
D 790
64 MPa (9300 psi)
Rockwell Hardness, R Scale
D 785
111
Izod Impact Strength, Notched
@ 23°C (73°F)
D 256
860 J/m (16.1 ft·lbf/in.)
Impact Strength, Unnotched
@ 23°C (73°F)
D 4812
NB
Thermal Properties
Deflection Temperature
@ 0.455 MPa (66 psi)
D 648
94 °C (201 °F)
@ 1.82 MPa (264 psi)
D 648
81 °C (178 °F)
Typical Processing Conditions
Processing Melt Temperature
250-260 °C (482-500 °F)
Heated Bed Temperature
90-110 °C (194-230 °F)
Cooling
0 to 100%
Layer Height
0.1 or 0.2 mm
Speed
30 to 60 mm/s
Infill
As needed up to 100%
Perimeter
Around 1 mm
Minimal Layer Time
5 sec
a
Unless noted otherwise, all tests are run at 23°C (73°F) and 50% relative humidity.
b
Unless noted otherwise, the test method is ASTM.
c
Units are in SI or US customary units.
Comments
Properties reported here are typical of average lots. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given.
Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.
11/9/2022 4:11:15 PM