Click for PDF
Technical Data Sheet
Eastman™ Copolyester GMX200

  • Appliances (food contact)
  • Consumer housewares - food contact (FC)
  • Consumer housewares-NFC
  • Gift & seasonal items
  • Small appliances non-food contact
Key Attributes
  • Excellent clarity
  • Excellent processing capabilities
  • Good heat resistance
  • Good impact resistance
  • Quick cycle times

Product Description
A versatile polymer, the properties of Eastman GMX200 copolyester enable it to be used in a broad array of manufacturing processes including injection molding, injection stretch blow molding, reheat stretch blow molding, and extrusion. The unique impact and heat resistance properties of Eastman GMX200 can extend the life span of containers that are historically viewed as single use products.

Typical Properties

PropertyaTest MethodbTypical Value, Unitsc
General Properties
Specific GravityD 7921.28 g/cc
 ISO 1183, Method A1.27 g/cc
Rockwell Hardness, D ScaleD 785110
Mold ShrinkageD 9550.004-0.005 mm/mm
Mechanical Properties
Flexural ModulusISO 1782100 MPa
Flexural StrengthISO 17873 MPa
Tensile Stress @ YieldISO 52754 MPa
Tensile Strength @ BreakISO 52750 MPa
Elongation @ YieldISO 5273.9 %
Elongation @ BreakISO 527320 %
Tensile ModulusISO 5272200 MPa
Impact Resistance (Puncture), Total Energy 
     @ 23°C (73°F)ISO 6603-251 J
Impact Resistance (Puncture), Energy @ Max. Load 
     @ 23°C (73°F)ISO 6603-226 J
Izod Impact Strength, Notched 
     @ 23°C (73°F)ISO 1806.3 kJ/m2
     @ -40°C (-40°F)ISO 1804.4 kJ/m2
Impact Strength, Unnotched 
     @ 23°C (73°F)ISO 180NB
     @ -40°C (-40°F)ISO 180NB
Flexural ModulusD 7902325 MPa
Flexural StrengthD 79083 MPa
Tensile Stress @ YieldD 63852 MPa
Tensile Stress @ BreakD 63858 MPa
Elongation @ YieldD 6384.2 %
Elongation @ BreakD 638283 %
Tensile ModulusD 6382125 MPa
Impact Resistance (Puncture), Total Energy 
     3.2-mm (0.125-in.) Thick Plaques @ 23°C (73°F)D 376336 J
Impact Resistance (Puncture), Energy @ Max. Load 
     3.2-mm (0.125-in.) Thick Plaques @ 23°C (73°F)D 376365 J
Impact Resistance (Puncture), Total Energy 
     3.2-mm (0.125-in.) Thick Plaques @ -40°C (-40°F)D 376379 J
Impact Resistance (Puncture), Energy @ Max. Load 
     3.2-mm (0.125-in.) Thick Plaques @ -40°C (-40°F)D 376348 J
Izod Impact Strength, Notched 
     @ 23°C (73°F)D 25658 J/m
     @ -40°C (-40°F)D 25631 J/m
Izod Impact Strength, UnNotched 
     @ 23°C (73°F)D 4812NB
     @ -40°C (-40°F)D 4812NB
Optical Properties
HazeD 1003<1.0 %
TransmittanceD 100389 %
Thermal Properties
Deflection Temperature 
     @ 0.455 MPa (66 psi)ISO 7581 °C
     @ 1.82 MPa (264 psi)ISO 7570 °C
     @ 0.455 MPa (66 psi)D 64881 °C
     @ 1.82 MPa (264 psi)D 64870 °C
Typical Processing Conditions
Drying Temperatured 76 °C (170 °F)
Drying Timee 4-6 hrs
Processing Melt Temperature 250-293 °C (480-560 °F)
Mold Temperature 27-50 °C (80-120 °F)

aUnless noted otherwise, all tests are run at 23°C (73°F) and 50% relative humidity.
bUnless noted otherwise, the test method is ASTM.
cUnits are in SI or US customary units.
dBased on a 35 kg (78 lb) hopper desiccant dryer. Larger hoppers may require lower temperatures to avoid sticking.
eBased on a 76°C drying temperature and starting moisture level of 5400 ppm or 0.54% with average ambient conditions of 8.3°C (47°F) and 60% RH. Higher starting moisture levels, lower drying temperatures, and/or higher humidity and higher temperature ambient conditions will require longer drying times to reach moisture levels below 300 ppm or 0.03% as recommended.

Properties reported here are based on limited testing. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given.

Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.

4/20/2020 10:37:46 AM