Click for PDF View TDS
Technical Data Sheet
Regalite™ UltraPure 1100 Hydrocarbon Resin


Applications
  • Hygiene adhesives
  • Solvent borne packaging adhesives
  • Waterborne hygiene adhesives
Key Attributes
  • Improved resistance to heat and oxidation
  • Low odor
  • Low organic volatile content
  • Low trace chemicals
  • Water-white initial color

Product Description
Regalite™ UltraPure 1100 hydrocarbon resin is a low molecular weight fully hydrogenated water-white thermoplastic resin with low targeted volatiles after aging, low odor, and low, stable amount of substances of interest as a function of aging temperature. Regalite UltraPure 1100 hydrocarbon resin has improved color stability compared to the heritage grade with the same aromatic content and softening point. Like Regalite R1100 hydrocarbon resin, this resin has excellent compatibility in a wide range of polymers and is an excellent tackifier in hot melts requiring good color retention upon aging.

Typical Properties

PropertyTest MethodTypical Value, Units
General
Ring and Ball Softening PointASTM D 6493100 °C
Odora 
     Styrene <0.05 ppm
Color, Hunterlab bb 
     5 cm path length 0.3
Color, GardnerbASTM D 6166<1
     24 hours @ 175°C 0.5
Density @ 25°C 0.99 kg/dm3
Cloudpoint, MMAPc 80 °C
Molecular Weightd 
     Mz 1200
     Mw 830
     Mn 600
     Mw 1.4
Melt Viscosity, Brookfield Thermosel 
     @ 120°C 25000 cP (mPa·s)
     @ 140°C 2500 cP (mPa·s)
     @ 160°C 500 cP (mPa·s)
Glass Transition Temperature (Tg)e 50 °C

aMeasured by HS-GC-MS/SIM after 30 minutes at 190°C, Eastman method.
b50% resins solids in toluene
cMMAP cloud point temperature from 1:2 mixture of methylcyclohexane and aniline, Eastman method.
dMolecular weight measured via Gel Permeation Chromatography (GPC) using polystyrene standards, elution with THF.
eGlass transition temperature by differential scanning calorimetry, 20°C/min.



Compatibility and Solubility
Soluble at all useful proportions in aliphatic, aromatic, and chlorinated hydrocarbons. Insoluble in alcohols and water. Compatible at all ratios, or in limited but practically useful proportions, with natural and synthetic rubbers, EVA (ethylene-vinyl acetate) copolymers, APAO (amorphous poly-alpha-olefins), SIS (styrene-isoprene-styrene) block copolymers, SBS (styrene-butadiene-styrene) block copolymers SIBS (styrene-isoprene/butadiene-styrene) block copolymers, SEBS (styrene-ethylene/butylene- styrene) block copolymer, SEPS (styrene-ethylene/propylene-styrene) block copolymer, polyethylene, polypropylene polymers, PIB (polyisobutene), OBC (olefinic block copolymer), mPE (metallocene-catalyzed polyethylene) and TPE (thermoplastic elastomers).

Packaging
Regalite™ UltraPure 1100 hydrocarbon resin is pastillated, packed in polyethylene bags of 20 kg net, and supplied on shrink-wrapped pallets of 50 bags (1000 kg) each, from Eastman’s facilities in the Netherlands and from warehouses located in Europe.

Storage
Due to the thermoplastic behavior, pastillated and flaked resins may fuse, block or lump. This can be accelerated under any of the following conditions: 1) above ambient temperature 2) prolonged storage 3) pressure, e.g. stacking pallets, or a combination of these conditions. This is particularly applicable for low softening point resin grades.

In order to maintain the flake or pastille shape, we therefore storing the material in a temperature-controlled area; be careful with stacking material or applying pressure and preventing prolonged storage.

It should be noted that lumping does not have a negative impact on the product specifications. Due to the nature of the product, claims regarding lumping cannot be accepted.

Resins are prone to gradual oxidation, some more so than others. This could result in darkening and/or it could have an adverse effect on the solubility of the resin in organic solvents or on its compatibility with polymers. Accordingly, it is recommended that strict control of inventory be observed at all times, taking care that the oldest material is used first.

Regalite™ UltraPure 1100 hydrocarbon resin material will remain within product specification limits, as mentioned in the sales specification sheet, for a period of at least twelve months after shipment from Eastman''s production facilities in the Netherlands, provided storage conditions outlined in this data sheet are observed. However, as we can neither anticipate the conditions under which the resin is processed nor the end use applications for which it is used, we recommend that the material be tested upon receipt.

Comments
Properties reported here are typical of average lots. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given.


Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.


4/6/2020 10:25:35 AM