Click for PDF View TDS
Technical Data Sheet
Eastman™ Ester Gum 8XD Resin


Applications
  • Adhesives/sealants-B&C
  • Chewing gum
Key Attributes
  • Broad compatibility and solubility
  • Low acid number
  • Low odor and taste
  • Medium softening point
  • Thermoplastic resin

Product Description
Eastman ester gum 8XD resin, a pale, medium hard thermoplastic resin, is the glycerol ester of rosin. It is produced by a special process that yields a low-odor, low-acid-number product. In most countries Eastman ester gum 8XD resin has clearance as a masticatory ingredient in chewing gum compositions.

Typical Properties

PropertyTest MethodTypical Value, Units
General
Softening PointaASTM E 2890 °C
Color, Gardner, 50% resin solids in tolueneASTM D 61666.5
Acid Number (mg KOH/g) 6 mg KOH/g
Density @ 25°C 1.08 kg/dm3

aRing & Ball
bASTM D465



Compatibility and Solubility
Pale color; low odor; low acid number; good adhesion and tack-producing properties; broad solubility and compatibility ranges.

Compatible with natural rubber, synthetic rubbers, Ethylcellulose, Polystyrene, many natural and synthetic resins, waxes and most vinyl resins.

Soluble in aromatic hydrocarbons, aliphatic hydrocarbons, esters, ketones and carbon tetrachloride. Insoluble in Methanol and Ethanol.

Solubility Parameters, 50% resin concentration. 7,0-10,6 in Class I solvents - weakly hydrogen-bonded; 7,4-10,5 in Class II solvents - moderately hydrogen-bonded; 9,5-11,4 in Class III solvents - strongly hydrogen-bonded.

Packaging
Eastman ester gum 8XD resin is supplied in either flaked or solid form. Flaked material is packed in polyethylene bags of 25 kg net, and supplied on shrink-wrapped pallets of 40 bags (1000 kg) or 30 bags (750 kg) each, from Eastman facilities in the Netherlands and from warehouses located in Europe.

Eastman ester gum 8XD resin in solid form is supplied in fiber drums with a net weight of 220 kg, on pallets containing four drums each, from Eastman production facilities in the Netherlands and from warehouses located in Europe.

Resin in solid form is less prone to oxidation.

Storage
Due to the thermoplastic behavior, pastillated and flaked resins may fuse, block or lump. This can be accelerated under any of the following conditions: 1) above ambient temperature 2) prolonged storage 3) pressure, e.g., stacking pallets, or a combination of these conditions. This is particularly applicable for low softening point resin grades.

In order to maintain the flake or pastille shape, we therefore recommend storing the material in a temperature-controlled area, be careful with stacking material or applying pressure and preventing prolonged storage.

It should be noted that lumping does not have a negative impact on the product specifications. Due to the nature of the product, claims regarding lumping cannot be accepted.

Resins are prone to gradual oxidation, some more so than others. This could result in darkening and/or it could have an adverse effect on the solubility of the resin in organic solvents or on its compatibility with polymers. Accordingly, it is recommended that strict control of inventory be observed at all times, taking care that the oldest material is used first.

Eastman ester gum 8XD resin material will remain within product specification limits, as mentioned in the sales spec sheet, for a period of at least six months after shipment from Eastman production facilities in the Netherlands for pastillated material, twelve months for solid material, provided storage conditions outlined in this data sheet are observed.

Comments
Properties reported here are typical of average lots. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given.


Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.


5/7/2020 12:18:48 PM