Technical Data Sheet
Eastar™ Renew Copolyester EB062-30
Applications
Fruit juice drinks packaging
Liquor/wine packaging
Packaging component - food contact
Soft drink packaging
Water packaging
Key Attributes
Easy to extrude, cut, print, and seal
Effective barrier properties
Excellent chemical resistance
Excellent clarity
Excellent colorability
Good impact strength
Good stiffness
High gloss appearance
Toughness
Product Description
Eastar™ Renew copolyester EB062-30 is a resin specifically developed for extrusion blown bottles and containers where aesthetics such as high clarity and gloss, coupled with design flexibility, drive demand. Compared to commonly used materials, Eastar Renew EB062-30 runs on most standard processing equipment. Extremely high melt strength makes the resin an excellent choice when manufacturing bottles. This product offers improved toughness, melt strength, chemical resistance, excellent color, and clarity in thick-walled applications. Eastar Renew EB062-30 is certified to NSF/ANSI Standard 51 for Food Equipment Materials.
Eastar Renew EB062-30 is cleared for various food contact applications (including contact with most alcoholic beverages) by FCN No. 1234 as described in the Food and Drug Administration (FDA) Inventory of Effective Food Contact Substance Notifications and may be used in full compliance with the United States Federal Food and Drug, and Cosmetic Act, provided that it is used within the limitations set forth for FCN 1234.
Eastman Renew polymers have been certified by International Sustainability & Carbon Certification (ISCC), a global, independent agency for tracking sustainable content in a variety of industries. Renew polymers are produced with ISCC certified circular content by mass balance allocation.
Renew polymers enable a brand to reduce consumption of fossil feedstock-based plastics, achieve sustainability targets without compromise, and be a fast mover in a growing market for sustainable consumer products.
This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED.
The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.
Typical Properties
Property
a
Test Method
b
Typical Value, Units
c
General Properties
Density
D 792
1.25 g/cm
3
Mold Shrinkage
D 955
0.3 %
Mechanical Properties
Tensile Stress @ Yield
D 638
47 MPa (6900 psi)
Tensile Stress @ Break
D 638
48 MPa (7000 psi)
Elongation @ Yield
D 638
5 %
Elongation @ Break
D 638
300 %
Tensile Modulus
D 638
1900 MPa (2.7 x 10
5
psi)
Flexural Modulus
D 790
1900 MPa (2.7 x 10
5
psi)
Flexural Strength
D 790
65 MPa (9400 psi)
Rockwell Hardness, R Scale
D 785
105
Izod Impact Strength, Notched
d
@ 23°C (73°F)
D 256
NB
@ -40°C (-40°F)
D 256
63C J/m (1.2C ft·lbf/in.)
Impact Strength, Unnotched
e
@ 23°C (73°F)
D 4812
NB
@ -40°C (-40°F)
D 4812
NB
Impact Resistance (Puncture), Energy @ Max. Load
@ 0°C (32°F)
D 3763
41 J (30 ft·lbf)
@ 23°C (73°F)
D 3763
41 J (30 ft·lbf)
@ -40°C (-40°F)
D 3763
39 J (29 ft·lbf)
Optical Properties
Haze
D 1003
1.3 %
Gloss
@ 60°
D 2457
143
Regular Transmittance
D 1003
87 %
Total Transmittance
D 1003
91 %
Color
a*
D 2244
-0.2
b*
D 2244
0.6
L*
D 2244
95.0
Thermal Properties
Deflection Temperature
@ 0.455 MPa (66 psi)
D 648
73 °C (163 °F)
@ 1.82 MPa (264 psi)
D 648
63 °C (145 °F)
Vicat Softening Temperature
D 1525
85 °C (185 °F)
a
Unless noted otherwise, all tests are run at 23°C (73°F) and 50% relative humidity.
b
Unless noted otherwise, the test method is ASTM.
c
Units are in SI or US customary units.
d
C = Complete Break; Nonbreak as defined by ASTM D 256.
e
Nonbreak as defined by ASTM D 4812.
Comments
Properties reported here are typical of average lots. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given.
Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.
1/26/2021 8:59:56 AM