Technical Data Sheet
Eastman Cristal™ One Pro Renew-50
Color cosmetics packaging
Jars-skin care pkg
Personal care & cosmetics packaging
Skin care packaging
Ability to mold thick parts
Excellent processing capabilites
Good chemical resistance
Good gate aesthetics
Recyclable with the PET stream
Eastman Cristal™ One Pro Renew-50 is a copolyester designed to be fully compatible with the PET recycling stream. Thus, it enables brand owners to achieve recyclable cosmetics packaging that is tough, exhibits good chemical resistance. It is suitable for molding thick-walled transparent containers or parts (up to approximatively 12mm), while maintaining clarity and color. Cristal™ One Pro Renew-50 meets the definition of resin identification code #1 (RIC1) as defined by the California Assembly Bill (#906) and by ASTM D7611. Other end-product attributes, including but not limited to size, color, auxiliary components, and availability of collection, may also impact recyclability.Eastman Renew polymers have been certified by International Sustainability & Carbon Certification (ISCC), a global, independent agency for tracking sustainable content in a variety of industries. Renew polymers are produced with ISCC-certified recycled content by mass balance allocation. Eastman Renew polymers have been certified by International Sustainability & Carbon Certification (ISCC), a global, independent agency for tracking sustainable content in a variety of industries. Renew polymers are produced with ISCC-certified recycled content by mass balance allocation.Renew polymers enable brand owners to reduce consumption of fossil feedstock-based plastics, achieve sustainability targets without compromise, and be a fast mover in a growing market for sustainable consumer products.
Typical Value, Units
General Properties (ASTM Method)
Mechanical Properties (ASTM Method)
Impact Strength, Unnotched
@ 23°C (73°F)
Izod Impact Strength, Notched
@ 23°C (73°F)
Flexural Yield Strength
Elongation @ Break
Thermal Properties (ASTM Method)
@ 1.82 MPa (264 psi)
@ 0.455 MPa (66 psi)
Typical Processing Conditions
16-38 °C (60-100 °F)
Processing Melt Temperature
250-280 °C (480-540 °F)
130-140 °C (265-285 °F)
Unless noted otherwise, all tests are run at 23°C (73°F) and 50% relative humidity.
Unless noted otherwise, the test method is ASTM.
Units are in SI or US customary units.
Properties reported here are typical of average lots. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given.
Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.
2/19/2021 2:40:06 AM