Click for PDF
Technical Data Sheet
Eastman Cristal™ Renew Copolyester EN076-100


Applications
  • Bottles-color cosmetics pkg
  • Bottles-skin care pkg
  • Closures-fragrance pkg
  • Color cosmetics packaging
  • Fragrance packaging
  • Jars-skin care pkg
  • Personal care & cosmetics packaging
  • Personal care bottles
  • Personal care packaging
  • Skin care packaging

Product Description
Eastman Cristal™ Renew copolyester EN076-100 is a copolyester designed to be fully compatible with the PET recycling stream. Thus, it enables brand owners to achieve recyclable cosmetics packaging with a combination of good color and high clarity for molded parts with an RIC1 resin. This product is suitable for ISBM applications and some thinner-walled molded parts for the cosmetics and personal care market. Cristal™ EN076-100 meets the definition of resin identification code #1 (RIC1) as defined by ASTM D7611. Other end-product attributes, including but not limited to size, color, auxiliary components, and availability of collection, may also impact recyclability. Eastman Renew polymers have been certified by International Sustainability & Carbon Certification (ISCC), a global, independent agency for tracking sustainable content in a variety of industries. Renew polymers are produced with ISCC certified circular content by mass balance allocation.

Renew polymers enable a brand to reduce consumption of fossil feedstock-based plastics, achieve sustainability targets without compromise, and be a fast mover in a growing market for sustainable consumer products.


Typical Properties

PropertyaTest MethodbTypical Value, Unitsc
Mechanical Properties
Flexural ModulusD 7902350 MPa (3.4 x 105 psi)
Rockwell Hardness, R ScaleD 785111
Izod Impact Strength, Notched 
     @ 23°C (73°F)D 25667 J/m (1.2 ft·lbf/in.)
     @ -40°C (-40°F)D 25633 J/m (0.6 ft·lbf/in.)
Optical Properties
HazeD 10030.8 %
Total TransmittanceD 100389 %
Other Properties
Bio-based Content 0 %
Thermal Properties
Crystallization half time 4.5 min.
Typical Processing Conditions
Drying Temperature 150 °C (302 °F)
Drying Time 4-6 hrs
Processing Melt Temperature 277-293 °C (530-560 °F)
Mold Temperature 16-32 °C (60-90 °F)

aUnless noted otherwise, all tests are run at 23°C (73°F) and 50% relative humidity.
bUnless noted otherwise, the test method is ASTM.
cUnits are in SI or US customary units.


Comments
Properties reported here are typical of average lots. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given.


Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.


10/16/2023 11:29:01 AM