Click for PDF View TDS
Technical Data Sheet
Eastman Cristal™ One Pro Renew-100


Applications
  • Color cosmetics packaging
  • Fragrance packaging
  • Jars-skin care pkg
  • Personal care & cosmetics packaging
  • Skin care packaging
Key Attributes
  • Ability to mold thick parts
  • Excellent processing capabilites
  • Good chemical resistance
  • Good gate aesthetics
  • Good toughness
  • Recyclable with the PET stream
  • Transparency

Product Description
Eastman Cristal™ One Pro Renew-100 is a copolyester designed to be fully compatible with the PET recycling stream. Thus, it enables brand owners to achieve recyclable cosmetics packaging that is tough, exhibits good chemical resistance. It is suitable for molding thick-walled transparent containers or parts (up to approximatively 12mm), while maintaining clarity and color.

Cristal™ One Pro Renew-100 meets the definition of resin identification code #1 (RIC1) as defined by the California Assembly Bill (#906) and by ASTM D7611. Other end-product attributes, including but not limited to size, color, auxiliary components, and availability of collection, may also impact recyclability.

Eastman Renew polymers have been certified by International Sustainability & Carbon Certification (ISCC), a global, independent agency for tracking sustainable content in a variety of industries. Renew polymers are produced with ISCC-certified recycled content by mass balance allocation.

Renew polymers enable brand owners to reduce consumption of fossil feedstock-based plastics, achieve sustainability targets without compromise, and be a fast mover in a growing market for sustainable consumer products.


Typical Properties

PropertyaTest MethodbTypical Value, Unitsc
General Properties (ASTM Method)
Mold ShrinkageD 9550.003-0.005 in./in.
Specific GravityD 7921.31 g/cc
Mechanical Properties (ASTM Method)
Impact Strength, Unnotched 
     @ 23°C (73°F)D 4812NB
Izod Impact Strength, Notched 
     @ 23°C (73°F)D 481252 J/m
Flexural Yield StrengthD 79078 MPa
Flexural ModulusD 7902400 MPa
Tensile ModulusD 6382300 MPa
Elongation @ BreakD 638>150 %
Tensile StrengthD 63854 MPa
Thermal Properties (ASTM Method)
Deflection Temperature 
     @ 1.82 MPa (264 psi)D 64862 °C
     @ 0.455 MPa (66 psi)D 64870 °C
Typical Processing Conditions
Mold Temperature 16-38 °C (60-100 °F)
Processing Melt Temperature 250-280 °C (480-540 °F)
Drying Time 4-6 hrs
Drying Temperature 130-140 °C (265-285 °F)

aUnless noted otherwise, all tests are run at 23°C (73°F) and 50% relative humidity.
bUnless noted otherwise, the test method is ASTM.
cUnits are in SI or US customary units.


Comments
Properties reported here are typical of average lots. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given.


Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.


2/25/2021 4:48:25 AM