Technical Data Sheet
Eastar™ Renew DN501-50 Copolyester
Applications
Electronics
Key Attributes
Ability to mold thick parts
Ease of processing
Easy to extrude, cut, decorate, and seal
Excellent clarity and color
Excellent colorability
Good chemical resistance
Good impact strength
Good stiffness
High gloss appearance
Improved gate aesthetics
Readily fill intricate molds
Toughness
Product Description
Eastman Eastar™ Renew DN501-50 copolyester is a high flow product designed and engineered for many different applications. With its excellent color and clarity and its ability to mold thick parts with improved gate aesthetics, Eastar™ Renew DN501-50 is clearly a well-suited copolyester for many applications. Other outstanding features are excellent chemical resistance, high gloss, and improvements in processing such as faster cycle times, and lower scrap rates. Eastar™ Renew DN501-50 is also ideally suited for two-shot molding due to its lower processing temperatures, very slow crystallization rate, and flow characteristics. Eastar™ Renew DN501-50 contains a mold release derived from vegetable based sources.
Eastman Renew polymers have been certified by International Sustainability & Carbon Certification (ISCC), a global, independent agency for tracking sustainable content in a variety of industries. Renew polymers are produced with ISCC certified circular content by mass balance allocation.
Renew polymers enable a brand to reduce consumption of fossil feedstock-based plastics, achieve sustainability targets without compromise, and be a fast mover in a growing market for sustainable consumer products.
Typical Properties
Property
a
Test Method
b
Typical Value, Units
c
General Properties
Specific Gravity
D 792
1.25 g/cm
3
Mold Shrinkage
Parallel to Flow, 3.2-mm (0.125-in.) thickness
D 955
0.00450 mm/mm
Mechanical Properties (ISO Method)
Haze
D 1003
>0.5 %
Tensile Strength @ Yield
ISO 527
45 MPa (6526.69 psi)
Tensile Strength @ Break
ISO 527
28.2 MPa (4090.06 psi)
Transmittance
D 1003
>90 %
Elongation @ Yield
ISO 527
4.9 %
Elongation @ Break
ISO 527
201.7 %
Tensile Modulus
ISO 527
1639.6 MPa (2.38 x 10
5
psi)
Mechanical Properties
Impact Resistance (Puncture), Energy @ Max. Load
@ -40°C (-40°F)
D 3763
48.9 J (36.06 ft·lbf)
Tensile Modulus
D 638
1820 MPa (2.63 x 10
5
psi)
Impact Resistance (Puncture), Energy @ Max. Load
@ 23°C (73°F)
D 3763
36.2 J (26.69 ft·lbf)
Tensile Stress @ Break
D 638
50.5 MPa (7527.50 psi)
Tensile Stress @ Yield
D 638
48.0 MPa (6874.79 psi)
Elongation @ Break
D 638
350.4 %
Elongation @ Yield
D 638
4.5 %
Flexural Yield Strength
D 790
68.94 MPa (9998.90 psi)
Flexural Modulus
D 790
1931.4 MPa (2.8 x 10
5
psi)
Rockwell Hardness, R Scale
D 785
102.1
Izod Impact Strength, Notched
@ 23°C (73°F)
D 256
920 J/m (17.23 ft·lbf/in.)
@ -40°C (-40°F)
D 256
60.9 J/m (1.14 ft·lbf/in.)
Impact Strength, Unnotched
@ 23°C (73°F)
D 4812
2840.3 J/m (53.21 ft·lbf/in.)
@ -40°C (-40°F)
D 4812
3168.5 J/m (59.36 ft·lbf/in.)
Thermal Properties
Deflection Temperature
@ 0.455 MPa (66 psi)
D 648
70.9 °C (159.6 °F)
@ 1.82 MPa (264 psi)
D 648
63.1 °C (145.6 °F)
Typical Processing Conditions
Drying Temperature
d
65-70 °C (149-158 °F)
Drying Time
6-8 hrs
Processing Melt Temperature
218-240 °C (424-464 °F)
Mold Temperature
16-38 °C (61-100 °F)
a
Unless noted otherwise, all tests are run at 23°C (73°F) and 50% relative humidity.
b
Unless noted otherwise, the test method is ASTM.
c
Units are in SI or US customary units.
d
In the event of the customer using a large dryer (greater than 8 feet tall) and pressure considerations, we recommend 65 C as the highest drying temperature, and for 8 hrs drying time
Comments
Properties reported here are based on limited testing. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given.
Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.
7/10/2023 8:41:56 AM