Click for PDF View TDS
Technical Data Sheet
Eastman Aventa™ Renew FP1200-43 compostable materials


Chemical Synonym
  • Aventa™ FP1200 Renew; FP1200-43; compostable materials
Applications
  • Single use articles - food contact
  • Straws single use-FC
Key Attributes
  • Clarity
  • Ease of processing
  • Heat resistance
  • Toughness

Product Description
Eastman Aventa™ Renew, is a new family of compostable materials derived from responsibly sourced wood pulp and circular content, which enables customers to reduce consumption of fossil feedstock-based plastics and achieve sustainability targets without compromising quality and consumer experience.

Eastman Aventa™ Renew FP1200-43 is a food contact grade noted for its excellent balance of heat resistance and toughness making it ideal for extruded straws and films.

Eastman Renew materials have been certified by International Sustainability & Carbon Certification (ISCC), a global, independent agency for tracking sustainable content in a variety of industries. Eastman Renew materials are produced with ISCC certified circular content by mass balance allocation.


Typical Properties

PropertyTest MethodTypical Value, Units
General
Specific GravityD 7921.3
General Properties
Bulk DensityD 18950.75 g/cm3
Mechanical Properties
Tensile ModulusD 6382694 MPa
Elongation @ BreakD 63811 %
Flexural ModulusD 7902686 MPa
Rockwell Hardness, R ScaleD 78599
Izod Impact Strength, Notched @ 23°C (73°F)D 256150 J/m
Izod Impact Strength, Unnotched @ 23°C (73°F)D 48122471 J/m
Miscellaneous Properties
Mold ShrinkageInternal0.5 %
Permanence Properties
Water Absorption, 24 h immersion (10 mil film)D 5709 %
Thermal Properties
Deflection Temperaturea 
     @ 0.455 MPa (66 psi)D 64876 °C
     @ 1.82 MPa (264 psi)D 64861 °C
Glass Transition Temperature (Tg)DSC118 °C
Coefficient of Linear Thermal Expansion (10 mil film) 
     M.D.D69912 x 10-5 °C
     T.D.D69912 x 10-5 °C
Typical Processing Conditions
Drying Temperature 60 °C - 66 °C (140 °F - 150 °F)
Drying Time 4-6 hrs (8 hrs Maximum)
Moisture Content Upon DryingD 6869-03300-700 ppm
Processing Temperature 221 °C - 238 °C (430 °F - 460 °F)
Mold Temperature 32 °C - 60 °C (90 °F - 140 °F)

aConditioned 40 hours at 50% RH, 23°C (73°F)



Technical Disclaimer
All certifications have been obtained at the raw material level. Customers are responsible for appropriate product level certifications to support their marketing claims.

Comments
Properties reported here are typical of average lots. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given.


Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.


9/23/2021 4:22:52 PM