Click for PDF
Technical Data Sheet
Eastman Cristal™ One E Renew-30

  • Bottles-skin care pkg
  • Personal care & cosmetics packaging
  • Personal care bottles
  • Personal care packaging
  • Skin care packaging
Key Attributes
  • Effective barrier properties
  • Excellent drop impact strength
  • Excellent melt strength
  • Good chemical resistance
  • Good stiffness
  • Recyclable with the PET stream
  • Toughness
  • Transparency and clarity

Product Description
Eastman Cristal™ One E Renew-30 is a copolyester designed for to be fully compatible with the PET recycling stream for extrusion-blown molded bottles for the skincare, personal care and color cosmetics markets. This resin is suitable for blow-molding both thin and thick-walled applications, while maintaining clarity, chemical compatibility, toughness and design freedom.

Cristal™ One E Renew-30 meets the definition of resin identification code #1 (RIC1) as defined by the California Assembly Bill (#906) and by ASTM D7611. Other end-product attributes, including but not limited to size, color, auxiliary components, and availability of collection, may also impact recyclability.

Eastman Renew polymers have been certified by International Sustainability & Carbon Certification (ISCC), a global, independent agency for tracking sustainable content in a variety of industries. Renew polymers are produced with ISCC certified circular content by mass balance allocation.

Renew polymers enable a brand to reduce consumption of fossil feedstock-based plastics, achieve sustainability targets without compromise, and be a fast mover in a growing market for sustainable consumer products.

Typical Properties

PropertyaTest MethodbTypical Value, Unitsc
General Properties (ASTM Method)
DensityD 7921.32 g/cm3
Mold ShrinkageD 9550.003-0.005 in./in.
Mechanical Properties (ASTM Method)
Tensile ModulusD 6382200 MPa
Tensile StrengthD 63855 MPa
Elongation @ BreakD 638>100 %
Flexural ModulusD 7902200 MPa
Flexural Yield StrengthD 79076 MPa
Izod Impact Strength, Notched 
     @ 23°C (73°F)D 481255 J/m
Impact Strength, Unnotched 
     @ 23°C (73°F)D 4812NB
Thermal Properties (ASTM Method)
Deflection Temperature 
     @ 1.82 MPa (264 psi)D 64864 °C
     @ 0.455 MPa (66 psi)D 64869 °C
Typical Processing Conditions
Processing Melt Temperature 240-255 °C
Drying Temperature 130-140 °C (4-6 hrs)

aUnless noted otherwise, all tests are run at 23°C (73°F) and 50% relative humidity.
bUnless noted otherwise, the test method is ASTM.
cUnits are in SI or US customary units.

Properties reported here are typical of average lots. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given.

Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.

8/24/2023 3:07:49 PM