Click for PDF
Technical Data Sheet
Eastar™ Renew Copolyester EN001-25

  • Blow molding
  • Flavored water packaging
  • Fruit juice drinks packaging
  • Personal care packaging
  • Soft drink packaging
  • Sport drinks packaging
  • Still water packaging
Key Attributes
  • Clear appearance
  • Enhanced processing capability compared to commodity PET
  • Good for injection stretch blow molding (ISBM)
  • Not a material of concern
  • PVC alternative
  • Recyclable

Product Description
Eastar Renew EN001-25 is a clear copolyester for single use food & beverage and general purpose packaging. It is designed for injection stretch blow molding (ISBM) and has enhanced processing capability compared to commodity PET.

Eastman Renew polymers have been certified by International Sustainability & Carbon Certification (ISCC), a global, independent agency for tracking sustainable content in a variety of industries. Renew polymers are produced with ISCC certified circular content by mass balance allocation.

Renew polymers enable a brand to reduce consumption of fossil feedstock-based plastics, achieve sustainability targets without compromise, and be a fast mover in a growing market for sustainable consumer products.

Eastar Renew Copolyester EN001-25 meets the definition of resin identification code #1 (RIC1) as defined by ASTM D7611. Other end product attributes including but not limited to size, color, auxiliary components, and availability of collection may impact recyclability.

Eastar Renew Copolyester EN001-25 may be used in various food contact applications under the U.S. Food & Drug Administration (FDA) regulations.

This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED. The GREENGUARD INDOOR AIR QUALITY CERTIFIED mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman copolyesters, visit Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Typical Properties

PropertyaTest MethodbTypical Value, Unitsc
General Properties (ASTM Method)
Specific GravityD 7921.33
General Properties (ISO Method)
DensityISO 1183, Method D1.33 g/cm3
Mechanical Properties (ASTM Method)
Tensile Stress @ YieldD 63858 MPa (8400 psi)
Tensile Stress @ BreakD 63825 MPa (3600 psi)
Elongation @ BreakD 638120 %
Tensile ModulusD 6382400 MPa (3.5 x 105 psi)
Flexural ModulusD 7902500 MPa (3.6 x 105 psi)
Flexural Yield StrengthD 79084 MPa (12200 psi)
Rockwell Hardness, R ScaleD 785112
Izod Impact Strength, Notched 
     @ 23°C (73°F)D 25640 J/m (0.75 ft·lbf/in.)
     @ -40°C (-40°F)D 25627 J/m (0.51 ft·lbf/in.)
Impact Strength, Unnotched 
     @ -20°C (-4°F)D 4812NB
     @ 23°C (73°F)D 4812NB
     @ -30°C (-22°F)D 4812NB
     @ -40°C (-40°F)D 4812NB
Impact Resistance (Puncture), Energy @ Max. Load 
     2.5-mm (0.100-in.) Thick Plaques, @ 23°C (73°F)D 376326 J (19 ft·lbf)
     2.5-mm (0.100-in.) Thick Plaques, @ -40°C (-40°F)D 37631.6 J (1.2 ft·lbf)
     3.2-mm (0.125-in.) Thick Plaques @ 23°C (73°F)D 376331 J (23 ft·lbf)
     3.2-mm (0.125-in.) Thick Plaques @ -40°C (-40°F)D 37632.1 J (1.6 ft·lbf)
Mechanical Properties (ISO Method)
Tensile Stress @ YieldISO 52757 MPa
Tensile Stress @ BreakISO 52725 MPa
Elongation @ BreakISO 527120 %
Tensile ModulusISO 5272400 MPa
Flexural ModulusISO 1782300 MPa
Flexural Yield StrengthISO 17877 MPa
Rockwell Hardness, R ScaleISO 2039-2114
Izod Impact Strength, Notched, Type 1 Specimen, Type A Notch 
     @ 23°CISO 1804.5 kJ/m2
     @ -40°CISO 1803.1 kJ/m2
Impact Strength, Unnotched, Type 1 Specimen 
     @ -20°CISO 180NB
     @ 23°CISO 180NB
     @ -30°CISO 180190 (90%C 10%NB) kJ/m2
     @ -40°CISO 180170 kJ/m2
Impact Resistance (Puncture), Energy @ Max. Load 
     2.5-mm Thick Plaques @ 23°CISO 6603-215 J
     2.5-mm Thick Plaques @ -40°CISO 6603-20.8 J
     3.2-mm Thick Plaques @ 23°CISO 6603-218 J
     3.2-mm Thick Plaques @ -40°CISO 6603-21.0 J
Optical Properties (ASTM Method)
HazeD 10031.0 %
Total TransmittanceD 100384 %
Thermal Properties (ASTM Method)
Deflection Temperature 
     @ 0.455 MPa (66 psi)D 64869 °C (156 °F)
     @ 1.82 MPa (264 psi)D 64865 °C (149 °F)
Thermal Properties (ISO Method)
Deflection Temperature 
     @ 0.45 MPaISO 7569 °C
     @ 1.80 MPaISO 7565 °C

aUnless noted otherwise, all tests are run at 23°C (73°F) and 50% relative humidity.
bUnless noted otherwise, the test method is ASTM.
cUnits are in SI or US customary units.

Properties reported here are typical of average lots. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given.

Eastar is a trademark of Eastman Chemical Company.

Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.

7/31/2023 11:03:00 AM