Click for PDF
Technical Data Sheet
Eastar™ Renew DN501-10 Copolyester

  • Electronics
Key Attributes
  • Ability to mold thick parts
  • Ease of processing
  • Easy to extrude, cut, decorate, and seal
  • Excellent clarity and color
  • Excellent colorability
  • Good chemical resistance
  • Good impact strength
  • Good stiffness
  • High gloss appearance
  • Improved gate aesthetics
  • Readily fill intricate molds
  • Toughness

Product Description
Eastman Eastar™ Renew DN501-10 copolyester is a high flow product designed and engineered for many different applications. With its excellent color and clarity and its ability to mold thick parts with improved gate aesthetics, Eastar™ Renew DN501-10 is clearly a well-suited copolyester for many applications. Other outstanding features are excellent chemical resistance, high gloss, and improvements in processing such as faster cycle times, and lower scrap rates. Eastar™ Renew DN501-10 is also ideally suited for two-shot molding due to its lower processing temperatures, very slow crystallization rate, and flow characteristics. Eastar™ Renew DN501-10 contains a mold release derived from vegetable based sources.

Eastman Renew polymers have been certified by International Sustainability & Carbon Certification (ISCC), a global, independent agency for tracking sustainable content in a variety of industries. Renew polymers are produced with ISCC certified circular content by mass balance allocation.

Renew polymers enable a brand to reduce consumption of fossil feedstock-based plastics, achieve sustainability targets without compromise, and be a fast mover in a growing market for sustainable consumer products.

Typical Properties

PropertyaTest MethodbTypical Value, Unitsc
General Properties
Specific GravityD 7921.25 g/cm3
Mold Shrinkage 
     Parallel to Flow, 3.2-mm (0.125-in.) thicknessD 9550.00450 mm/mm
Mechanical Properties (ISO Method)
HazeD 10030.55 %
Tensile Strength @ YieldISO 52745 MPa (6526.69 psi)
Tensile Strength @ BreakISO 52728.2 MPa (4090.06 psi)
TransmittanceD 100390.80 %
Elongation @ YieldISO 5274.9 %
Elongation @ BreakISO 527201.7 %
Tensile ModulusISO 5271639.6 MPa (2.38 x 105 psi)
Mechanical Properties
Impact Resistance (Puncture), Energy @ Max. Load 
     @ -40°C (-40°F)D 376348.9 J (36.06 ft·lbf)
Tensile ModulusD 6381820 MPa (2.63 x 105 psi)
Impact Resistance (Puncture), Energy @ Max. Load 
     @ 23°C (73°F)D 376336.2 J (26.69 ft·lbf)
Tensile Stress @ BreakD 63850.5 MPa (7527.50 psi)
Tensile Stress @ YieldD 63848.0 MPa (6874.79 psi)
Elongation @ BreakD 638350.4 %
Elongation @ YieldD 6384.5 %
Flexural Yield StrengthD 79068.94 MPa (9998.90 psi)
Flexural ModulusD 7901931.4 MPa (2.8 x 105 psi)
Rockwell Hardness, R ScaleD 785102.1
Izod Impact Strength, Notched 
     @ 23°C (73°F)D 256920 J/m (17.23 ft·lbf/in.)
     @ -40°C (-40°F)D 25660.9 J/m (1.14 ft·lbf/in.)
Impact Strength, Unnotched 
     @ 23°C (73°F)D 48122840.3 J/m (53.21 ft·lbf/in.)
     @ -40°C (-40°F)D 48123168.5 J/m (59.36 ft·lbf/in.)
Thermal Properties
Deflection Temperature 
     @ 0.455 MPa (66 psi)D 64870.9 °C (159.6 °F)
     @ 1.82 MPa (264 psi)D 64863.1 °C (145.6 °F)
Typical Processing Conditions
Drying Temperatured 65-70 °C (149-158 °F)
Drying Time 6-8 hrs
Processing Melt Temperature 218-240 °C (424-464 °F)
Mold Temperature 16-38 °C (61-100 °F)

aUnless noted otherwise, all tests are run at 23°C (73°F) and 50% relative humidity.
bUnless noted otherwise, the test method is ASTM.
cUnits are in SI or US customary units.
dIn the event of the customer using a large dryer (greater than 8 feet tall) and pressure considerations, we recommend 65 C as the highest drying temperature, and for 8 hrs drying time

Properties reported here are based on limited testing. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given.

Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.

7/26/2022 11:05:08 AM