Click for PDF
Technical Data Sheet
Eastman Cristal™ Renew copolyester DN011-50


Applications
  • Bottles-color cosmetics pkg
  • Color cosmetics packaging
  • Personal care & cosmetics packaging

Product Description
Eastman Cristal™ Renew DN011-50 copolyester is a brilliantly clear polymer having excellent impact strength, chemical resistance, and low shrinkage rates. Eastman Cristal™ Renew DN011-50 copolyester contains a mold release.

Eastman Renew polymers have been certified by International Sustainability & Carbon Certification (ISCC), a global, independent agency for tracking sustainable content in a variety of industries. Renew polymers are produced with ISCC certified circular content by mass balance allocation.

Renew polymers enable a brand to reduce consumption of fossil feedstock-based plastics, achieve sustainability targets without compromise, and be a fast mover in a growing market for sustainable consumer products.


Typical Properties

PropertyaTest MethodbTypical Value, Unitsc
General
Specific GravityD 7921.23
Mold Shrinkage 
     Parallel to FlowD 9550.002-0.005 mm/mm (0.002-0.005 in./in.)
Mechanical Properties
Tensile Stress @ YieldD 63844 MPa (6300 psi)
Tensile Stress @ BreakD 63854 MPa (7800 psi)
Elongation @ YieldD 6384 %
Elongation @ BreakD 638330 %
Tensile ModulusD 6381800 MPa (2.6 x 105 psi)
Flexural ModulusD 7901800 MPa (2.6 x 105 psi)
Flexural StrengthD 79066 MPa (9600 psi)
Rockwell Hardness, R ScaleD 785105
Izod Impact Strength, Notched 
     @ 23°C (73°F)D 256NB
     @ -40°C (-40°F)D 25677 J/m (1.4 ft·lbf/in.)
Impact Strength, Unnotched 
     @ 23°C (73°F)D 4812NB
     @ -40°C (-40°F)D 4812NB
Impact Resistance (Puncture), Energy @ Max. Load 
     @ 23°C (73°F)D 376346 J (34 ft·lbf)
     @ -40°C (-40°F)D 376346 J (34 ft·lbf)
Optical Properties
HazeD 1003<1.0 %
Regular TransmittanceD 100389 %
Total TransmittanceD 100392 %
Thermal Properties
Deflection Temperature 
     @ 0.455 MPa (66 psi)D 64873 °C (163 °F)
     @ 1.82 MPa (264 psi)D 64864 °C (147 °F)
Typical Processing Conditions
Drying Temperature 71 °C (160 °F)
Drying Time 6 hrs
Processing Melt Temperature 249-271 °C (480-520 °F)
Mold Temperature 16-38 °C (60-100 °F)

aUnless noted otherwise, all tests are run at 23°C (73°F) and 50% relative humidity.
bUnless noted otherwise, the test method is ASTM.
cUnits are in SI or US customary units.


Comments
Properties reported here are typical of average lots. Eastman makes no representation that the material in any particular shipment will conform to the values given.


Eastman and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.


10/20/2023 9:04:31 AM